Q45 Afm To Rb25

[skylion]

Hey all,

I have bought a Q45 AFM for my RB25. It is fitted with a GT2540R Turbo. Has anyone fitted one yet and can you tell me what adaptors or changes are needed fpr the plumbing from a stock AFM. Wiring I have sorted already.

Regards,

Jeremy

[paulr33]

the q45 is 90mm so to change from the stock rb25 item you will need to change the pipework and pod adapter as well, as the ones you have will be the 80mm size

change wiring

change pipework to 90mm or use a silicon joiner / grower (power intake kit does this)

get pod filter adapter to suit 90mm instead of 80mm

[dangerman4]

Hey all,

I have bought a Q45 AFM for my RB25. It is fitted with a GT2540R Turbo. Has anyone fitted one yet and can you tell me what adaptors or changes are needed fpr the plumbing from a stock AFM. Wiring I have sorted already.

Regards,

Jeremy

start with telling us what you are using from your turbo to your standard afm!

are you still running the standard intake black crinkled hose?

if so you will need to thro that over your left shoulder and replace it with some shiny new stainless or alum, and then use silicon joiners to suit.its not hard, just run what ever size your turbo comp cover is forward about six inches then bend it out and adapt to suit your new afm and any plumb back blow off valve returns can be welded in just past the bend.

[skylion]

the q45 is 90mm so to change from the stock rb25 item you will need to change the pipework and pod adapter as well, as the ones you have will be the 80mm size

change wiring

change pipework to 90mm or use a silicon joiner / grower (power intake kit does this)

get pod filter adapter to suit 90mm instead of 80mm

Thanks for the info. Much appreciated

[batesr33]

if your using the stock intake pipe... get a long flat head screw driver... stretch the stock intake pipe over your q45 afm... works like a charm till you can get a new intake pipe made up