Jump to content
SAU Community

Recommended Posts

Anyone know how to take out the front and back speakers in an skyline r33 1997 model or where i can get a guide from? For the front speakers do you just pop out the grill or the whole door frame needs to come off? cheers !

Edited by sumguy
I tried to take off the passenger side door but i couldnt get the part off where off where the powerwindow button - that whole handle, it was just stuck :D

It's a barstard isn't it. There's a white latch on the underside which you hold and pull at the same time.. if and when you get it off, silicone it straight away so it's easier next time.

Where the handle is on the passanger door the actual handle that you pull to open the door from the inside has a plastic cover which unclips and there should be a screw behind it, its a bit hard to explain but thats your issue (i think) cos the same thing happened to me, you just forget sometimes where the little bastards are.

Yer, the pocket in that console... it has a round hidey-bit, with a little screwdrivery slit in it. Screwdriver the cover off, and unscrew the screw.

Then, the whole panel will come out.. it is just clipped in after you remove the screw.

Then unplug the power window switch console, or just unscrew the console out of that plastic part.

Window handle on the inside is hard to take off, but if you ease it to the left, it'll eventually unclip. From there, tug the bottom of the door, work your way towards the top. The doorskin is clipped into the door (after you remove the THREE screws at the bottom).

Then when the whole thing is loose from the bottom, lift up slightly to unhook it from the window-sill.

Pods are 4 screws. Easy out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...