Jump to content
SAU Community

Recommended Posts

Anyone heard of Morel Hybrid Ovation 6 inchers splits?

I can get some ultra cheap so I need to know if they are any good.

Heres a link to them.

Morel Hybrid Ovation 6

Also, What do you think of the new series Alpine PDX2.150 to drive them?

Thanks for your input. :(

Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/
Share on other sites

These are third from the top of the range morel speakers..

They generally sell here for around 600 mark i beleive. Or was it the integra series for that much??

How much are you gettin them for?

Edited by siddr20
Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2854845
Share on other sites

  • 1 month later...

finding out for you now mate, will you seriously buy a few?

http://www.fhrxstudios.com/ is where i am getting them from.

Why are you quick to doubt me? If I said I am getting them I am getting them.

Edited by Pauly33GTS-t
Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2976783
Share on other sites

Im not doubting you, its just that the distributor sells to the public direct at pretty much wholesale rates.

If anybody is selling them cheaper, well id be asking WHAT THE HELL, considering they went from $1200 retail to $535 and now ur saying ur getting them for $400+.

Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2979775
Share on other sites

ok chris rogers, i deal in 2 or 3 things at a time for me, and ill turn up the volume dont u worry about that... in dB.

I simply wanted your opinion on these splits as I am going to use them for possibly the front and back or just the splits at front and same woofers (6ers) in the back parcel shelf. i didnt want a OMG WHAT GET ME MERCHANDISE YOU c**t!.

Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2990793
Share on other sites

Cos this guy thinks he is cool telling everyone he can get cheap stuff.

But what he doesnt realise, Chris and I both own shops and we have access to the stuff.

Hey guess what Pauly i can get stuff cheaper than you, so instead of buying over the net how about come get it local ill match any price FHRX can dish out.

Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2991187
Share on other sites

I just checked with FHRX and they sell Morel for the price printed on the pricelist on their website. Marty stated that they sell them for this price because the retail is in grey next to them.

On that note, this topic is now closed. Let's leave it at that.

Everyone take a deep breath and think about what you type before you hit the 'add reply' button next :mellow:

Link to comment
https://www.sau.com.au/forums/topic/153170-morel-splits/#findComment-2991225
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...