Jump to content
SAU Community

Recommended Posts

hey fellas just been looking at my oil pressure gauge and it is sitting between 0-2 when im idling

this i assume is 1kg/cm2 of pressure which equals 14.2 psi of pressure

am i correct in saying this?

also i have read that sometimes the gauges/senders can go faulty and is better to get an aftermarket one etc etc but just curious to see

what is the normal psi idle range for a 33gtst? and also what it should go up to (mine goes up to about 4 on high revs but sits usually around 2.5-3 when driving normally

any info appreciated

ps; heres a conversion table that i used

http://www.csgnetwork.com/prestableinfo.html

thanks

Edited by tek_01
Link to comment
https://www.sau.com.au/forums/topic/153392-oil-pressure-conversion/
Share on other sites

hey fellas just been looking at my oil pressure gauge and it is sitting between 0-2 when im idling

this i assume is 1kg/cm2 of pressure which equals 14.2 psi of pressure

am i correct in saying this?

also i have read that sometimes the gauges/senders can go faulty and is better to get an aftermarket one etc etc but just curious to see

what is the normal psi idle range for a 33gtst? and also what it should go up to (mine goes up to about 4 on high revs but sits usually around 2.5-3 when driving normally

any info appreciated

ps; heres a conversion table that i used

http://www.csgnetwork.com/prestableinfo.html

thanks

hey man, sounds like your guage is working fine, mine sits at the exact same levels as yours when idling and driving. :sick:

Hey tek 1, yeah mine reads usually 2 or just under sometimes. due to the hot weather in sydney oil pressure went to the same as yours between 0 and 2. aslong as its not staying on 2 when your driving it and its not on zero then ur sweet. On idle only a small amount of pressure is needed but when driving yeah has to increase.

Edited by LatinR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...