Jump to content
SAU Community

Recommended Posts

Uh, really it's going to save you a lot of money (or, better put, you'll gain money rather than lose it) if you just sell it and buy a gtst.

To properly CONVERT it to RWD, you'll just need to source gtst bits anyway.. Not worth it at all!

Edit: ok I see you said adjust, my bad. If you do mean temporarily, then it's simply a matter of removing a fuse (I don't know specifics), that's if its the same as a GTR, someone who knows more than me should be able to confirm this pretty easily.

Edited by aDrew_C
hey guys im a noob at this.

Is it posible to adjust a r32 gts4 to just rwd?

how is it done?

how much?

whats involved?

cheers

Tone.

easy...buy a switch loom $35

you can register your interest here...

http://www.skylinesaustralia.com/forums/in...5207&st=220

i need 3 more names before i do another batch

my car came with a switch, which also came with a problem, i lost my 4wd altogether now. I bought 'Dirtgarage' switch, which i was told it would override the error but it didnt do shit. Would anyone have an idea of getting my 4wd back into action?

Cheers

Steve.

check your fuses, check you have power going to the ets controller, if you have and it still doesn't work, check the flashing led on the ets controller and post back what the code is if you can't get a hold of a manual.

You would be wiser to check the fluid level in the reservoiur in the boot on the rhs. If that is ok you may need to bleed the system as well to get it working properly. That is assuming that the electronics are ok and you have checked the fuse under the hood is OK. It says on the cover which one.

Yea the fuse under the dash and hood is fine, id have to have a look at the comp tommorow. And the fluid in the reservoiur seems to be fine.

You see my confusion comes when i try put 4wd back on its active, but only for about 3secs max, then the 4wd light comes on.

Hopefully its nothing major and i could resolve it myself with your help which btw i appreciate alot, cheers fellas.

Lets assume the electronics are fine though, how would i bleed the system? Sorry newbie with hands on work, jus want to know that im doing the right thing before i go cause another problem.

Cheers,

Steve.

Edited by GTS4-32

http://www.skylinesaustralia.com/forums/in...=bleed++attessa

In there is a howto on bleeding attessa.

Make sure you check the fuse under the bonnet as well. The ~3sec delay is normal for the 4wd light to come on if there is a fault.

Fluid good, Bled properly, check fuses, check the led on the ets controller for diagnostic readout.

Well i just had a quick look at the fluid level and condition in the reservoiur, and it seems to be black with a tinge of pink at the top but not much...would that be my problem there? Before i go any further with the investigation.

Cheers,

Steve.

check your fuses, check you have power going to the ets controller, if you have and it still doesn't work, check the flashing led on the ets controller and post back what the code is if you can't get a hold of a manual.

I had a look at the code on the ets controller and the red LED flashes 22 times in 1 sec period then stops and starts again. If i could please get a read out on what that means, be much appreciated.

Cheers,

Steve.

22 is ETS oil level switch or circuit.

You definately have enough fluid in the res?

Otherwise check the res level switch continuity.

If neither is the problem look at wiring harness or controller borked.

Well its just below max..but i will be bleeding it as soon as i can get another pair of hands to help me out and abit of time on my hands. Hopefully thatll solve my issue.

Thanks heaps heller44, uve been a great help. :laugh:

Cheers,

Steve.

  • 2 weeks later...

i started bleeding it on the weekend, and it was working fine at the start, did it every 30 sec or so, but after about the 3rd attempt it wasnt sucking no more. Tryed everything, just didnt get going again.

Just a quick question, im bleeding the pump and re-filling the pump at the same time, is this correct? Because the fluid doesnt seem to be turning pink in the pump.

Cheers,

Steve.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...