Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Yeah, I have a feeling the bleed valve is dodgy since it was a home chop job by the previous owner. Its been taken in and out before because the car had to pass the pits.

Spoke to a guy at a workshop that I've booked in next week, he says its probably a dodgy piece of vacuum hose and they can replumb it for me, or just take the whole thing out and put it back to factory boost (which isn't a bad idea considering stock internals) so that way I'll at least be able drive past 5000rpm safely. Pretty simple job, but I guess I'll leave it to a pro to fix as I've been quoted about $60 for an hour's work on it plus the cost of a new bit of vacuum hose (although I reckon your average mechanic will probably fix it in 10 minutes).

Will let y'all know how it goes when the car goes into the shop. Thanks for all the help people :)

All done. Just took out the bleed valve and replaced the vacuum hosing for about $20.

The down side is now the car doesnt feel half as fast as it did before I took the valve out and the boost was going through the roof :rolleyes: but I suppose at least my turbo isn't going to blow...

The car is boosting happily away at 0.4 bar now all the way to 7000rpm(?) limiter - which brings me to my next question: my redline is at 8000rpm so why is my limiter kicking in at 7000? it just bounces on 7000 and doesnt want to go any higher. The boost cut is gone however.

is it possible that the redline was lowered with the powerfc previously installed? is this hard to reprogram if so?

If not, does this problem sound like anything else?

Sounds like your boost has been returned to the stock output [by way of the vacuum hose replacing it - as you said]. So boost should be approx .55 bar [which = 7.9 psi]. Of course your boost limiter wont be there anymore...it isnt reaching high enough to hit this limiter [which is supposedly 1 bar]. You can probably ignore the factory boost gauge because it isnt accurate and its not in bar or psi anyway [kg/cm2]. Where did you get your figure from [0.4bar]? An aftermarket gauge or what?

Rev limit from factory is somwehre between 7000 - 7200. I know this because I have a stock ECU in my 34 and have recorded on a dyno up to 7100rpm and YES mine cuts out occasionally when I hit this range too.

If your display / rev gauge is not the original nissan one [such as tommy Kaira / Nismo etc] then the actual REDline marking could be anywhere [such as 8000] but the factory rev limiter may still be in operation [at the default value of around 7000].

I am sure the PowerFC would be able to control the rev limit but this is the risk you take when buying a modified 2nd hand car - risk as in, you dont know what your getting or what settings there are. You are asking some questions that are unique to your car and can't be answered by any of us! I hope I have been of some help though!

If you want more power get someone to put a bleed valve in properly or get an EBC [electronic boost controller]...If you are used to your car's power with more boost than stock, of course it is going to be slower now...

Zahos: nah, the guy took it out. I figure if I want to increase my boost I might do it later with an EBC of some sort, or at least some sort of in-car adjustable valve.

NismoR34: I got the reading from an Apexi a-pillar boost gauge. It sits on 0.4 all the way to 7000rpm. My dash is the stock Nissan dash and I'm quite sure the redline on the tacho starts at 8000rpm - so does this mean that the redline on the dash isn't really the redline set in the ECU? Does your dash have redline markings from 8000rpm?

All this could be purely academic if the engine shouldn't really be revving past 7000 anyway, regardless of where the markings on the dash are - I realise that. But I'm just curious why it cuts out at 7000 when the redline on the dash is at 8000.

And one last thing, 0.7 bar the figure I'm getting to be the safe boost level for stock internals/turbo on an R34 for street use - can you guys confirm this?

And yes Nismo/Zahos you guys have been a big help and its much appreciated :P

Originally posted by ARGH34

And yes Nismo/Zahos you guys have been a big help and its much appreciated :P

No worries....

Yeah, 0.7 should be quite safe. You could probably run a little higher for street use (squirst here and there), but 0.7 should be just fine.

Zahos

No my markings start at 7000 which is a broken red line [- - - -] and then the unbroken red line [----] starts at either 7500 or 8000 approx and goes all the way to the end of the tacho @ 9000rpm!

*brainstorm* With the vaccum hose that now sits in place of your previous boost valve, did they put any restrictors in there? I am guessing they havent! The standard hose has 2 metal restrictors inserted at either end of this hose, when I removed these 2 restrictors the boost dropped! This sounds like what you now have. Which is less boost than standard. I dont know where you could get restrictors from so I would suggest getting a boost controller in ASAP!

Yep. Just spoke to my mechanic, he says boost is pretty low at the moment (0.4 bar or around 6 pound) and that he regularly sets up customer cars up to 1 bar boost on stock turbo/internals safely (although he'll have to dyno it to test and make sure nothings going to blow up). I plan to get some EBC or dual stage boost controller. Mechanic said the cheapest way is to go the bleed valve/boost cut defender option and stick it up to 1 bar or thereabouts.

For the moment, the boost is going to have to wait - my alignment is out, and the wheel alignments were out by varying degrees on the left and right sides of my car - suggesting an accident and the need to use a chassis alignment rig (*sighs at buying cheap accident repaired japanese import*) to stop the car pulling to the left on a flat road :P

Oh as for the redline, my mechanic said that theres not much point going over 7000 anyway because the car drops right off its power/torque band at around 6600, so I really should be changing gears about then anyhoo.

I'll have to go home and double check my dashboard redline.

Your redline will be the same as mine - unless u have got an undercover GTR :(

I just remembered an ultra-cheap way to increase boost a little - use a cable tie to crimp [restrict] the hose a little bit. The other cheap way is to do what I did, fit a bleed valve. I fitted mine myself and it cost me like $25 total. Check for sale section or post a thread in WTB there may be some for sale around this place.

If I were you I would only increase the boost up to around 10psi or 12 psi at the most [1 bar is 14.5 psi]. HPI's r34 GTT project car had their turbo blow up at just .85 bar whilst flogging it around the track. You may not take yours on the track but do you wanna risk it for the sake of a bit more power now?

Most sensible people in the "turbo car" industry agree that 2-3 psi above standard is okay for stock turbo's / engines. Standard being approx 8psi. Its up to you though!

Hey mine pulls a bit to the right, but not too badly.

Dyno testing can be very helpful in finding out your cars power, boost setting, air/fuel ratios, state of tune, problems - like detonation etc...I had mine dyno'd and power was peaking at 7100rpm's when the rev limit kicked in so changing gears earlier on mine is not optimal especially in drag racing...Nissan quote 6400rpm as peak power on a standard car, which most of ours are not...

:confused: now you have made me wanna go and check mine...though I am already 99% sure it starts at 7k...

icon3.gif...another brainstorm, instead of going out to the garage which is all of 10 metres away I will sift through a hundred odd photo's on my pc cause I am sure I have got a pic of my dash here somewhere...*goes and browses*

...hours later [:)]...

icon3.gifah ha, in fact I posted a pic on SAU before...now I just got to find that link...

aahh there it is

aap.jpg

See 7000rpm redline! If your dash doesnt look like that then it isnt the stock nissan one [for a 34GTT].

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...