Jump to content
SAU Community

Recommended Posts

Does anyone know what you have to do to get wider wheels approved by the ACT RTA?

(Damn R32 with its 6.5 inch stockers)

Wanna go to about 8inches all round but want it road legal for insurance. The only decent japanese wheels start around that size it seems too.

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/
Share on other sites

I had 8's with 235's all round on my 32, and the fronts were pretty out there so to speak. I couldn't lower the car at all. I'm not sure if that'd change heaps with a smaller tyre either.

I think they usually say 7.5's on the front.

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2882979
Share on other sites

its the diameter that they pick on, no more then 2" larger then standard.

I find that so funny thou...coz in the ADR's it says nothing about a limit on diameter (except that the overall rolling diamteter must remain as close as possible) and it's all about width and track dependant on GVM

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2883193
Share on other sites

I find that so funny thou...coz in the ADR's it says nothing about a limit on diameter (except that the overall rolling diamteter must remain as close as possible) and it's all about width and track dependant on GVM

Its Canberra.

Ignore the f**king ADR's. They don't care, and it will cause you no end of grief trying to get them past.

Just go and see an engineer, get it on paper and then shove it in their face.

I hate that goddamned scotman.

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2886864
Share on other sites

Ok i've found a set of wheels that look allright...however I got told that i'll need some adaptor to fit them over the R32's front brakes.

I seem to dimly remember these adaptor plates (or whatever they are) not being legal? Does anyone know about them?

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2887510
Share on other sites

I heard theyre legal as long as they dont stick out from under the wheel arch, its the diameter that they pick on, no more then 2" larger then standard.
Ive heard differently, when i enquired bout my Z. i was told that diameter wasnt an issue, as long as the width is no more than 1 inch wider than stock, you can go any size you want. hence why you see heaps of cars/SUV's with big ass chromes, but the width is still within range. This was approx 1 year ago, things may have changed. ..
Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2887648
Share on other sites

spacers. stay away, get wheels that fit without them, theyre unsafe and illegal. would you buy cothes that fitted as long you wore certain underwear? (remember youre a man not a chick)

Cheers for the advice, and the friendly reminder :(

Link to comment
https://www.sau.com.au/forums/topic/154957-wider-wheels/#findComment-2887823
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...