Jump to content
SAU Community

Recommended Posts

I have a pretty basic question.

I have just bought a couple of Z32 AFM's and a PowerFC to go with my Skyline and I was wandering what I need to do to fit the AFM's to the car. I have the plugs already, I guess I am more interested in finding out what I need to do to physically replace the AFM's?

Any assistance would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/155598-fitting-z32-afms-to-rb26/
Share on other sites

you will need to rewire them as per Paulr33's site

http:\\paulr33.skylinesaustralia.com - digrams section.

then you will need to get pipes made up to convert the std 65mm hose to the new 80mm Z32 AFM's

you will need to rewire them as per Paulr33's site

http:\\paulr33.skylinesaustralia.com - digrams section.

then you will need to get pipes made up to convert the std 65mm hose to the new 80mm Z32 AFM's

You dont need to make new pipes to fit them at all.

I have recently fitted them to my GTR with Tomei AFM plugs.

The new plugs needed to be wired in to replace the factory AFM plugs, and some adapter plates were custom made for me by CRD to allow the Z32 AFM's to bolt on to my existing Apexi pod adapters.

z32AFM/PowerFC combination should give a gain in power and fingers crossed a better power curve. At least these are the reasons I am making the modifications to my GTR.

Thanks everyone for your responses. I am going to see if I can stretch the rubber hoses to fit and get a couple of adapter plates made up.

it will provide you with nothing more than tuning resolution

you should only need z32s if you are seeing the stock afms going to 5v

nothing else to be gained

stretching the houses doesnt sound like a good idea

apexi make a power intake kit to suit rb26 and z32s 80mm kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
×
×
  • Create New...