Jump to content
SAU Community

Recommended Posts

a stock rb25 will handle about 350-380hp safely, any more and you will start to lose a ringland or two. :)

depends how you drive it too..

i know of one in WA making ~400rwhp, but its not driven very hard, its barely driven at all.

whereas ive seen other rb25's let go at 330rwhp..

hell, mine died at 300hp, but thats another story..

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

well, right now horribly

when im done and dial in the spring rates to help with body roll in addition to the correct rear sway bar when someone figures out what car to use it from since its obviously not a GTR rear sway (200 dollar lesson)

i think it will handle well once i get everything done.

perhaps import a Whiteline rear swaybar from Sydneykid or Whiteline direct?

very very high quality piece of kit

Im using the whiteline front and rear adjuystable swaybars, whiteline bushes and pineapple rings, Bilstein shocks with height-lowering circlips with standard stagea springs.

very comfy and very very grippy. great suspn package and can be lowered by a fair bit. mine sits a tad high but thats my choice (2metres tall) due to picky police etc.

im going to see what i can do about whiteline from the US and have it shipped here. shouldnt be too much

But as an update

trying to research which rear toe rods are the same. If i had a copy of FAST i could do it myself.

I ordered 8000k dual beam HIDs shoudl be here next week

Bought some puddle lights

bought two 12s and an amp for a temporary setup until i fiberglass my setup and order my real equipment

got an alignmet today, its horribley still toe out in the rear, but since its been adjusted camber wise and as much toe as possible, i have almost 2 inches of clearance between shock and wheel. no more rubbing issues i see, but i ned to roll the rear fenders a tad more.

the kit never got ordered by my "friend" so im debating if i want to order it through someone else, or buy more go fast and handle fast parts.

i have yet to decide

OK

ordered DMAX s14 rear toe arms

THe prosport gauges came in today

the K LIGHT 8000K HIDS came in as well

im still waiting on an AEM UEGO

FPR

coilpack

and a dash pod

your HIDs are wayyy to blue. your going to get a ticket as soon as an off base cop sees them.

  • 2 weeks later...

OK

biggg update

bougth a manual swap

Got my greddy oil, flywheel bolts, and pilot bushing in

tranny will be here tomorrow

Garson, headrest pillows, mirror, trim accents, and soem other stuff.

bought NEW Work Emotion XD9 18x9 +20 all around

AEM Uego came in

Prosport gauges came in

FPR came in

HKS twin plate is here

lol

not cheap..... and you'll be parting with it soon enough ?

sad :happy:

what did you do with those 3 spoke wheels? man they look HORN

(Keep the dish, have as much of it as you want, not my style whatsoever, but BEJEEEBUS I love those 3 spoke rims!!)

i sodl em to a friend for 400 US.

im not sellign it anymore, now that i found this stupid 5 speed.

"stupid"...hmmmm

...i take it the manual install is not all wedding cake and honeymoon ??? :happy:

Edited by captinsane

OK

you can drift an automatic Stagea with the front shaft taken out

its crappy becuase its like an open diff or something, but it happens

I make an entire o2 housing back exhaust

i need to redo the part that goes under the subframe becuase i ran out of time and used a prebent section from an R32 exhaust...so ill do that next week or something

im still waiting on my tranny to get here

its boredome

im waiting ot get my new turbo in

once that happens i can order all my pipe for intercooler pipes and exhaust

i want to order it all at once to save on shipping

i found a place for 5.00 a foot for mild steel pipes

will be using a flowmaster muffler with two lone tips out the back

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...