Jump to content
SAU Community

Recommended Posts

doesnt work that way for me Sam :(

From memory (cos i did this packaged with a winery tour for SAUWA about 3 years ago) the more people you get together for it - the cheaper it becomes. The group booking information can be found on the swan valley oasis site - i tried to look it up but my work computer for some reason thinks its an "explicit site" must be all that talk about large balls.

  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

also best way to do it - is get people to deposit the money in your back BEFORE the event with the no refunds if you dont turn up policy.

As nice as all you are a lot of SAUWA people say they'll be at an event then dont turn up - so this way you have a commitment out of people and also have the numbers all organised with yourself and the venue.

also best way to do it - is get people to deposit the money in your back BEFORE the event with the no refunds if you dont turn up policy.

As nice as all you are a lot of SAUWA people say they'll be at an event then dont turn up - so this way you have a commitment out of people and also have the numbers all organised with yourself and the venue.

Guilty...Good plan ma'am

I need some input as to what people would like to do and when.

If we decide to play on a sunday we can only play a maximum of 9 holes (more than likely the front 9 which is far easier than the back 9). If we play on a saturday we can play the 18.

Cost is $12 per person per 9 holes with a discount offered (15%) to group bookings if paid in full in advance. I guess the easiest way to do that would be confirm your spot by paying me 2 weeks before the date so i can pay the booking, and receive the discount. I have not worked out how much it would be per person with the discount that we could receive.

I had thought to make sure as many people as possible can attend would be to plan early. I was thinking March 24 or 25th but that is obviously open to suggestion if thats not a good weekend (e.g. drifting event, or somehting that people would rather attend).

Have I missed any details that you guys want or need to know?

Regards

Brad

sounds good.

i'm up for either 9 or 18 holes, any day suits me except for march 4th (which is probably too close to plan anyway).

so that's my 9or18 holes and availability survey for you.

(i dont know where it is, but i'll look that up myself :P)

Location may also help people make the decision to come or not.

It is in the swan valley on West Swan Road. About 5 minutes from Roe highway. (Between roe highway and Gnangara Road)

Events wise - there is a MaxAuto Action on Sunday March 25th so if you are planning supa golf for the weekend of the 24th/25th... Donna and I would be in for the Saturday for 9 or 18 holes. If you can confirm this date I will drop you the dosh... if you can catch me Mr. Speed-cut! :P

Events wise - there is a MaxAuto Action on Sunday March 25th so if you are planning supa golf for the weekend of the 24th/25th... Donna and I would be in for the Saturday for 9 or 18 holes. If you can confirm this date I will drop you the dosh... if you can catch me Mr. Speed-cut! :P

Dude thats just not nice!!! Nissan gave me speed cut to give you guys a chance!!!

Saturday 24th it is. Tee off at 1ish? Decision decided!

Kids are welcome. Keep in mind, kids will slow play while looking for your ball that you lost! lol

Yup,

Saturday 24th at 2pm it is.

My suggestion is to do the front 9 holes as they are easier to play. It normally takes an hour and a halfish to play 9 holes so with a large group i dont think time will permit for 18.

Ill count up the numbers on monday 26th of Feb and make a booking, then take payments. Probably best into my bank account with a PM so i know its done, or other arrangments can be made. Will work these details out next week. Obviousy payments are non refundable.

Does that sound ok to all???

Regards

Brad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...