Jump to content
SAU Community

Recommended Posts

I have brand new pairs of OFFICIAL GT (perfect for skylines) white LED T10 lights. Hard to get a hand on these.

These are perfect for replacing your old yellow parker lights and give an amazing sharp white look because they have a CONCAVE lens and divert the light EVERYWHERE.

These LEDs can fit into parker lights, some map light, number plate lights, luggage compartment light and boot light as well.

Selling $19 a pair + $2 postage Australia wide. If you buy more then one pair postage is free.

FROM TUESDAY THE 6th TO WEDNESDAY 14th ONLY $15 A PAIR

PM me if you want a pair or more.

PLEASE LEAVE YOUR SAU USERNAME AS THE BANK REFERENCE WHEN MAKING DEPOSIT!!

Pick up also available in Melbourne (Wantirna South)

Here is what the blue and white pair look like in my R32:

white02xa2.jpg

62614174up4.jpg

Edited by pablo101
  • 3 weeks later...
  • 2 weeks later...

I have a heap of bright white T10 led's which will fit your parkers. I'll sell them for $25 a pair including postage. PM me.

I also have 1 or 2 pairs of phillips silver vision T10's which are also bright white, they give off a different kind of light compared to the LEDs. Ill sell these for $20 posted. PM me

These globes also fit in for the rear number plate light and look awesome compared to the yellow shit.

  • 2 weeks later...

The blue colored ones look good but the cops dont like them. But you dont have to just use them as parker lights, these LEDs can fit map light, map light, number plate light, side indicator, luggage compartment light and boot light as well.

Thats why I sell the white ones. The law says that white and yellow are fine.

Edited by pablo101
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...