Jump to content
SAU Community

Recommended Posts

Hi

I have been looking at getting a HR31 GTS X, and have recently found one that I like..

They are reasonably old, this one in particular is a 1986 model.

I was just wondering what peoples perspectives are on the HR31.

Are they too old?

Are parts hard to find in terms of suspension, exhausts, interior bits?

Is it worth just spending that little extra and just getting a R32 GTS-T?

Any feedback would be great, thanks!

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/157289-hr31-gts-x/
Share on other sites

Do you want a CLASSIC or just another Skyline is what you should be asking yourself?

If Classic is the answer you have no choice except for which HR31 you get, but if it's just another Skyline, well the skies the limit in R32's. It has been said that an RB25DET in an R32 is the ultimate Skyline.

How old is old?? My KHR30 is over 20 years old and still without cancer, so age shall not weary a good one.

And red tops suk, they have a problem over 5000 but some of the R31 people can elaborate more on that.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/157289-hr31-gts-x/#findComment-2920915
Share on other sites

have you ever driven one???

i have driven R30, R31, (including the HR31) and R32....

the R32 was so easy and loved the corners,

the R30 was similar, just not as much power, but very well balanced, absolute shitloads of potential

and the R31.... mate these things are a boat... it was like driving a massive falcon or something... now even with a turbo R31 they are good in a straight line, but are actually difficult to corner predictably/in total control.

just find one and drive it, if its what your after great! but i know what i would get if i had the cash....R32 with RB25det fo shizzle

i ended up with a kik arse RM30 as it was $400 and i couldnt pass it up...

Link to comment
https://www.sau.com.au/forums/topic/157289-hr31-gts-x/#findComment-2921350
Share on other sites

personalyl if i were to go from the start again .. sadly i woudlnt get a HR31 coupe like i did 4 years ago....... but wit hthat said.. with some TLC .. and some money thrown here and there..... HR31s are quiet a good car.

HICAS disabled and some better suspension.... its worlds apart from stock.

hence ive still got mine.

Link to comment
https://www.sau.com.au/forums/topic/157289-hr31-gts-x/#findComment-2925543
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...