Jump to content
SAU Community

Recommended Posts

hi guys

had this rattle for a while now but now its really getting on my nerves

when in low revs and in any gear, there is a real "fuzzy/buzzy" type of rattle on the passanger front seat side, sounds like its coming from infront of the glove box. At first i thought it was the pod rattleing against the guard but then i padded the pod up and it still happened so i eliminated that out of the factor.

the sound only happens when driving in low revs in any gear and once u pick up some revs, the sound dissapears.

i thought maybe a gasket? sounds like its coming from somewhere around the turbo

has anyone heard of this as a common problem or have any suggestions on what it could be

cheers

Link to comment
https://www.sau.com.au/forums/topic/158082-r33-series-1-engine-rattlesound/
Share on other sites

do u feel it through your pedal? mine vibrates/makes an aweful sound from 2000 to 2500 rpm in 2nd, 3rd and 4th

ive been told its just the clutch out of balance at that sort of rpms so not to worry about it

My car has that same rattle or whatever it is. When it first reared its ugly head i got nervous, but it still does it 3 months on and has been on the dyno for a few hours where it made good power and the tuner didnt comment on it at all....So it cant be that bad i reckon, if it gets annoying just turn the stereo up lol....

maybe its the head shield around the turbo. might have a screw loose and be tapping metal on metal (sorta vibrates on it at low rev). just a thought.. make sure all screws and clamps n stuff are all tightned around that area. if they are, then it probably an iternal thing

was just concerned cause it comes from the same area as where the turbo is located. It sounds like a vibration like something is vibrating against something else.

it wierd cause it goes away after about 1.5-2k revs.

Strange

Yeah I have exactly the same thing, But I'm sure my comes from the gearbox. As I removed the rubber surrounding from the gear stick and it was crystal clear it came from the gearbox. I notice the sound only happens if my motor is laboring or just off it.

mine does the exact same thing. at low revs. i have a twin plate clutch though. theyre tradtionally very noisy things. and its the plates and the disc that sits in the middle thats moving and virbating and making the noise. nothing to be worried about IMO

Make sure the noise isn't coming from the front of your engine....

How many K's has your car done....

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

I have the same problem... only loud when engine is cold and sounds like its coming from front of engine (not in the engine) near belt... at low revs aswell.

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

sounds like my problem though i wouldnt have a clue...

check the black case on front of engine?

Could you please elaborate? what to look for when im checkin the black case?

Edited by bluey33

done like 110k

its not coming from the front of the engine. it sounds like the sound is coming from infront of the glove box ,engine pay side (not inside the car :happy:) thats why i suspected my POD was rattling against my guard...but it wasnt that

the sound comes and goes fairly quick its only when the car struggles on low revs

dunno what the hell it is, and its not like i can pop the hood and look in when it makes the noise cause it only happens when moving, does happen on idle or when reving the car in N.

  • 1 month later...

Hey Peeps,

I got a rattle coming from the cam belt cover, a new belt was fitted 2 months ago, is only there when the engine is cold, once she has warmed up it goes,

any ideas what this could be??

(its a 1996 R33 S2 GTS-T)

it is booked in for a service in 2 weeks, (car is under complete warrenty untill september for all parts)

Cheers

Dazzler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...