Jump to content
SAU Community

Recommended Posts

how much did it set u back? From Nengun??

No bud, got from eBay JPS Performance. $1500 going to plug and play right now make sure she's working. Will have a look around to see who can tune for me.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

She's working and this is what the readout is after 30mins at idle with aircon on after 10 minutes then demister then a quick lap of the block.

Comes up with this reading and second pic errors.

DSC00176.jpg

DSC00175.jpg

Any ideas, whilst I madly read through the tutorial/manual by paulr33 here

Please move this thread guys if not suitable here. :(

howdy, thought this was as good a place as any to post this. In the scramble for a power fc, i have inetvetly ended up with two pfc's with h/c one brand new in the box frm japan, and one second hand i agreed to buy a little while ago, they are both for ECR33 Gtst so if anyone wants to show eoi nows the time as i have no need for two but do have an interested party. I'm leaning towards selling the second hand pfc, pm me if you want

Edited by madaz R33
pm sent madaz r33

so with all this talk about power fc's etc Just what is the definitive answer to engine management computers.

Everyone you speak to has a different answer and quote both personal and anecdotal evidence as to why their puda is the best.

This headlong dash for power fc has me shaking my head. Why would you want a product from a maker no longer in existence. As these things get older and and harder to find the tuners will be working more and more with other brands and parts and service will be difficult to source at best.

What are all the desirable features in a puda. Obviously you need fuel/air, spark/timing, Knock sensor etc. But what seperates one from the other. If you could have the puda to do it all. What would it do that most already cant and, what computer if any already fits the bill.

so with all this talk about power fc's etc Just what is the definitive answer to engine management computers.

Everyone you speak to has a different answer and quote both personal and anecdotal evidence as to why their puda is the best.

This headlong dash for power fc has me shaking my head. Why would you want a product from a maker no longer in existence. As these things get older and and harder to find the tuners will be working more and more with other brands and parts and service will be difficult to source at best.

What are all the desirable features in a puda. Obviously you need fuel/air, spark/timing, Knock sensor etc. But what seperates one from the other. If you could have the puda to do it all. What would it do that most already cant and, what computer if any already fits the bill.

Dude, I am havin the same dilemma myself. been hunting for A PFC for so long, and when ya find someone who has one, they want like $1800+. I have almost decided to go with a Microtec LT12s, ECU+controller+harness, $1850, and i'm sure it would be a damn fine system with plenty of support.

Edited by Spooner
I got a PFC + controller recently for less then 900 bucks, and I could of gotten more. For 32 GTR. I dont know what the fuss is about them being so pricey...

Yep, I noticed that Ian, when looking around there were plenty for Gtr's but not for R34 GTT. I'd say someone will buy the design and reproduce them again.

Taken from Nengun's web site.

We have heard preliminary reports of Apexera, the parent company of Apexi, declaring bankruptcy here in Japan. The reports suggest Apexera is seeking government assistance but still operating as normal, with the divisions other than Apexi being the largest contributing factor.

We will continue to offer all Apexi products for sale as we have confirmation of availability at the current stage and do not expect this to change in the short term. As with all of our products, we will keep the website updated with any changes in availability, so there is no need to send additional enquiries.

Please note Apexi products are on back order and can take up to 3 to 4 weeks for delivery. For faster service, if possible please choose another brand when purchasing parts.

08/03/2007 We have been informed that Apexi from the end of March/ April business will be continuing as usual with little or no delays.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...