Jump to content
SAU Community

Recommended Posts

Get a HKS turbo kit from Nengun. Hassle free installation, everything fits!! Fantastic power upgrade. Great value approx $2200 delivered. I would be looking at a GTRS.

I just installed a Nengun HKS GT2530 kit on RB20 and I get 220rwk @18psi with moderate tune.

Goes like shit off a shovel!!

Grippy.

Thanks Andrew,I have given the GTRS a lot of thought.Aaron,I must say the stage 3 hi-flow with vg30 rear seems the go.Mostly due to ease of fitment.Though I must admit I wander how a normal stage 3 and say 256 poncams would go.Everybody is now telling me cams are the way to go as only an idiot would mess up a cam change and damage anything.With all the people buying your turbos I wish they would report their results in the RB25 section.As a matter of interest is it the compressor on the stage three thats bigger to or just the turbine? Or is the turbine back cut a little?

A friend of mine had ahiflow from gcg in his 33.. Just injectors, power fc, cam gear, cooler.. Made 265kw.. Tuned by uni-group in sydney.. at 1.3

Im sure i have read heaps of others pushing around same power figure with the gcg hi-flow.. You should be able too as well..

Thanks Andrew,I have given the GTRS a lot of thought.Aaron,I must say the stage 3 hi-flow with vg30 rear seems the go.Mostly due to ease of fitment.Though I must admit I wander how a normal stage 3 and say 256 poncams would go.Everybody is now telling me cams are the way to go as only an idiot would mess up a cam change and damage anything.With all the people buying your turbos I wish they would report their results in the RB25 section.As a matter of interest is it the compressor on the stage three thats bigger to or just the turbine? Or is the turbine back cut a little?

Only the turbine changes throughout the different stages.

Most people generally dont upgrade camshafts as an extra $1000 on a car thats already making the sort of figures we see with our highflows is not really seen as necessary for a small amount of extra gain. :P

I agree with Slide..!! You really don't need cams for power on a stock motor. Cams will give you a better mid range and a little more top end but is big $$$$ for small gain. Really only for track applications.

I have used parts from Slide before and can recommend him for quality, value, security and prompt service.

No one can catch my R32 at the track and no cams required. (yet)..!! Pulls 1.10's at wakefield.

Grippy...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...