Jump to content
SAU Community

Recommended Posts

hey guys. i live down in sydney and have just bought an engine and gearbox for my skyline from brisbane.

i need to transport the motor down to sydney. i have a mate whose a truck driver who drives to brisbane regularly so im thinking i might hop in with him this weekend to pick up the motor myself. has anyone got a engine hoist, as well as know how we can sit the motor and box on the back of the truck safely so as not to damage anything?

ur help would be greatly appreicated

also another idea is to freight it down. so does anyone know a reliable company that they may organise for me to freight it and roughly how much would it cost??

i know im asking for alot, but any help would be GREATLY appreciated.

Link to comment
https://www.sau.com.au/forums/topic/159214-anyone-free-to-help-me-this-weekend/
Share on other sites

Best bet is to ring some of the engine re-builders in Brisbane and ask them who they use to freight engines. Also try Just-jap in Virginia (brisbane suburb) they deal in engines and they would nkow who to use.

I have not ever shipped an engine, but I am sure that you are looking at a couple of hundred easily as they aint that light and they will need to be put onto a pallet and strapped down to the pallet. I have seen this happen a few times.

try -

Gorton's Transport

(07) 3216 6899

I have heard they do engines, but it needs to be packed properly before they will pick it up.

Cheers

Chris

im thinking i might hop in with him this weekend to pick up the motor myself

I would doing be this, if it was me. A tyre and some good hold straps, chris has offered a hoist what more do you need?

Ive seen a couple of Freighted Motors come in a Crate which had Mounts on it for the Engine mounts Thus keeping it upright and stable. I would imagine Companies that courier motors to use this sort of Crate. See if you can dig one up or borrow one. They are made of wood, You could actually make one yourself if you got a few hours spare. :P

good luck to you.

Ive seen a couple of Freighted Motors come in a Crate which had Mounts on it for the Engine mounts Thus keeping it upright and stable. I would imagine Companies that courier motors to use this sort of Crate. See if you can dig one up or borrow one. They are made of wood, You could actually make one yourself if you got a few hours spare. :D

good luck to you.

sure these arent JDM front cuts from jap model horse and carts :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...