Jump to content
SAU Community

Recommended Posts

I emailed him for the VIN and engine number, this was the reply:

"Hello,

Thank you for your interest in my Skyline. The car is in absolutely perfect condition, no scratches, dings, dents or other imperfections. Always adult driven and garaged. Clear title. Price is 12,630 $ AUD if you buy now with shipping included. Firstly, I need to tell you that I recently moved to Greece due to work specially . Since I have no more relatives in Australia, I brought the car with me thinking that I could register it here. However, because of the big differences between the AU emissions and the Greece ones, I can't register it without spending a fortune. Here is what I suggest:we will use Global Lines Shipping (www.glob-lines-int.net) for payment and shipping which acts like an escrow service, so you pay the money in GLS account ( they hold the money until you receive the car ), I send the car over, you can inspect it, take it to a mechanic to check it out, drive it and then decide if you keep it or not. If, by any reason, you will not be satisfied with it ( even though I can assure you that it is exactly as described), you can return it at my expense for a full refund of your money, no questions asked. I think this is more than fair for the both of us. If you agree, please provide your full name and shipping address and I will get everything started immediately. Afterwards, GLS will invoice you the transaction details and payment instructions. All you will need to do is follow through with their guidelines.

Thanks"

Sounds dodgy to me

these type of ads are now all over carpoint and carsales also, they use a fraud money transfer site (escrow) where they tell you to deposit money into an account where you control the money and tell you they will send you the car for inspection.

its all bs

Edited by silver gts-t

Did anybody hit the link on the auction to report it to Ebay?

That escrow scam has been done to death on Ebay. This link shows how somebody scammed the scammer trying to do this. Quite funny. http://www.zug.com/pranks/powerbook/

Living in Greece now?

Last time it was Budapest

Hello,

Thank you for your interest in my Skyline. The car is in absolutely perfect condition, no scratches, dings, dents or other imperfections. Always adult driven and garaged. Clear title. Price is $26,200 AU if you buy now. Firstly, I need to tell you that I recently moved to Budapest, Hungary due to work and family. Since I have no more relatives back home, I brought the car with me thinking that I could register it here. However, because of the big differences between the AU emissions and the local ones, I can't register it. Here is what I suggest: you make the payment in an ebay managed trust fund ( they hold the money until you receive the car ), I send the car over, you can inspect it, take it to a mechanic to check it out, drive it. If, by any reason, you will not be satisfied with it ( even though I can assure you that it is exactly as described), you can return it at my expense for a full refund of your money, no questions asked. I think this is more than fair for the both of us. If you agree, please provide your full name and shipping address and I will get everything started immediately. Afterwards, ebay will invoice you the transaction details and payment instructions. All you will need to do is follow through with their guidelines.

Thanks

George

To which someone replied with:

Hi George,

Thankyou for your prompt reply to my enquiry.

It seems rather impractical to send the car half way round the world for an inspection. I have family members in Vienna - whom I have already contacted via instant messanger- who would be more than happy to drive to Budapest and inspect the car. If you can provide me with a phone number, an address and times when the GTR would be available to view I can pass it on. My cousin is a mechanic who builds and races BMWs and is very knowledgable about cars. This would save you a lot of time and hassle of organising shipping and insurance to Australia. Perhaps you could also forward some recent photos of the car in Budapest. I have never been there and would love to see shots of the GTR surrounded by the city. Can you confirm how many doors the vehicle has as your description on ebay says 4 but I can only count two in the photos. Certainly a 4 door GTR is extremely rare but you've already stated how unique this car is.

Thanks

:ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...