Jump to content
SAU Community

Recommended Posts

Not sure about which area this should go in but what the hell.

I'm looking to buy an R33 off carsales that was a bit of a unit but has been involved in a rear ender.

Just wondering if any one has had similar repairs done to their car and if so how much am i looking at. Curious to find out about labour, painting and chassis damage.

I had a similar shunt in a vs commodore that cost $4000 and they are cheap as chips regarding parts

I've seen parts to fix this around the site for around 1200 such as rear cut, boot lid, rear bar etc.

The owner reckons it should cost around 5000 to fix.post-2073-1173271897.jpg

This is the only pic i can find and am not willing to travel to queensland untill i know whether it is worth the hassle.

Any help appreciated

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/
Share on other sites

Is it an actual GTR or has it just been badged?

Depends if you're doing the work yourself or if you're giving it to a smashie... Doing yourself you could probably do it in under 5k if it's a GTS-T... GTR a fair bit more probably because of the cost of the rear quarters..

Also it looks a bit light to be Midnight Purple.. If it's a custom colour you might need to respray the whole car as making a nice looking match might be difficult

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2962534
Share on other sites

It ain't a GTR, the skyline plastic between the lights is clear, GTR's are solid and colour coded, in the 33 GTR's had rear wing not a lip, plus the rear gaurds aren't flared. The left is a dead give away which has minor damage.

May I suggest you get your hands on a copy of Nissan fast, it has crash estimate calc and will tell you what parts are required. This will give you a rough idea on cost.

Good Luck m8 :ninja:

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2962543
Share on other sites

all that power and it gets hit up the ass... probably for the best to be honest...

It'd be more inclined to believe that he lost it and went ass-end into a ditch or something...

a gtst with a badge... it's probably why it got rear ended

ROFL... Kamikaze stylez you think aye Marsss? :)

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2963530
Share on other sites

Not sure about which area this should go in but what the hell.

I'm looking to buy an R33 off carsales that was a bit of a unit but has been involved in a rear ender.

Just wondering if any one has had similar repairs done to their car and if so how much am i looking at. Curious to find out about labour, painting and chassis damage.

I had a similar shunt in a vs commodore that cost $4000 and they are cheap as chips regarding parts

I've seen parts to fix this around the site for around 1200 such as rear cut, boot lid, rear bar etc.

The owner reckons it should cost around 5000 to fix.post-2073-1173271897.jpg

This is the only pic i can find and am not willing to travel to queensland untill i know whether it is worth the hassle.

Any help appreciated

Buy my car and save yrself all the bullshit..

nuff said.:(

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2963774
Share on other sites

I wouldn't touch it

It's had a solid rear hit. Most likely bent chassis (not hard to do in a skyline it seems though)

To replace the rear isa "cut and shut" job.

Plus everything else.

The whole under body seems worked up badly.

Seriously, avoid it.

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2964882
Share on other sites

all that power and it gets hit up the ass... probably for the best to be honest...

Owner said it was lost in the wet.

They are GTR panels on a gtst and its a custom paint so unless the guy has any lying around to blend i doubt i could get the right solour again. Didn't think about custom paint or gtr panel costs i guess i'll stay away. Looks like it used to be quite a tank.

Thanks for the advice guys

Link to comment
https://www.sau.com.au/forums/topic/159556-damage-cost/#findComment-2965035
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
×
×
  • Create New...