Jump to content
SAU Community

Laurel Dash Cluster

Hella Flush
 Share

Recommended Posts

Hella Flush Experienced

Hella Flush

Posted
Posted

continuing my endevour for white ilumination... i have heard laurel c33 dashes light up white from factory (which look identical to a31 1990 and after dashes... however are not printed onto green plastic - they are printed on white or clear)

anyone with a laurel confirm? or anyone conveniently pulling out their laurel cluster could just look behind one of the dials to see what its printed onto? :D

Link to comment
https://www.sau.com.au/forums/topic/159652-laurel-dash-cluster/
Share on other sites
Hella Flush Experienced

Hella Flush

Posted
  • Author
Posted (edited)

hmm... a question is asked...

2/3 posts are irrelevant and worthless...

and 1 is a waste of my eyepower to read...

ahh shit just forgot im asking on the interwebs... everyones input from behind a monitor is required

phil - the only person who gave a warranted response... you able to pull cluster out and take a pic of the back of one of the dials? and pic of it lit up? :P

Edited by Hella Flush
32 4whore Experienced

32 4whore

Posted
Posted

zzzzzzzzzzziiiiiiiiiiiiinnnnnnnnnnnnnnnnGGGGGGGG!!!!!!!!

Ragging faggots. Anyone...........

Nope Can't see any.

Ur leaving a forum because ppl muck about and pay u out. BAH AHAHAHAHHA.

You saw everyone pay the shit out of me and u dont see me crying about it.

Move on.............

Next on Days Of Our lives..................

Like the turning of an hour glass. These are the days of our lives.

A31cefiro Community Regular

A31cefiro

Posted
Posted (edited)

I believe its 'like the sands through an hourglass...these are the days of our lives'.

...or something like that

anyway, the cluster illuminates white, looks the same as a ceffy one except no clock, and uses all the same plugs. the only difference is that while the ceffy cluster has grey around the numbers in the speedo/tacho, the laurel cluster does not...which also looks much nicer ;)

plug and play

Edited by A31cefiro
32 4whore Experienced

32 4whore

Posted
Posted

HAHAHAHAHHAA.

Stop using your mum as an excuse. you sit down with the other mothers club and watch it and then discuss is after the show.

I know you ways young man.

Hey have you sold your VS-KF's yet.

I might have a buyer for them. Or just a tyre kicker not sure. he said he was keen. But hey you know youth of today.

OHHHHH I fully want those rims but nah i cant get the cash till next week....... Hold on to em and i will get back to u

When will they learn...........

means13 Enthusiast

means13

Posted
Posted
hmm... a question is asked...

2/3 posts are irrelevant and worthless...

and 1 is a waste of my eyepower to read...

ahh shit just forgot im asking on the interwebs... everyones input from behind a monitor is required

phil - the only person who gave a warranted response... you able to pull cluster out and take a pic of the back of one of the dials? and pic of it lit up? :P

you forget that a large portion of your posts are also useless..

i asked where to get a front bar and you said you have 3 ceffy aftermarket front bars but dont wanna sell one.. that to me is a useless post

HE HAS THE PASENGER SIDE AIR VENT COVER !!!!!!!!!!!!!!!!!!!!

i got one for free from mates wrecked ceffy last week

mwahahaqhaha

just another example.. anyway this is a useless post so im bailing...

PSC

A31cefiro Community Regular

A31cefiro

Posted
Posted

yeah mate still have the rims.

ill sell them if i get a buyer, otherwise ill wack them on an old S13.

on another note also picked up a set of old school SSR 15x7s at work the other day for next to nothing. some kid came in with some 'fully sik' momo 17x7s for his S13, and said he didnt want the old 15s. shotgunned! still have the stickers on the insides of the rims and all :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DatsunBanana
      Rear subframe stay bracket bolt removal issues

      By DatsunBanana · Posted

      Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • GTSBoy
      [HOW-TO] Winter Steam-Clean & Odour Removal in 30 min

      By GTSBoy · Posted

      I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • The Bogan
      [HOW-TO] Winter Steam-Clean & Odour Removal in 30 min

      By The Bogan · Posted

      Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • GTSBoy
      [HOW-TO] Winter Steam-Clean & Odour Removal in 30 min

      By GTSBoy · Posted

      Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
×
×
  • Create New...