Jump to content
SAU Community

Recommended Posts

I've hurt two standard R200's at the drags with a fair bit less than 700hp. They weren't fresh diffs so i couldn't say how good they are new but i'd be shelling out for an aftermarket centre and a complete freshen up of the bearings/seals etc.

Yep pual or other members mark34GTR 9.11Q/M and over 1000hp or theo 8s big HP

Even could try CRD many 1000hp cars there

Yep 1000 hp of 26 - True 700hp of 26/30 -2500ft lb of torque - this is my bone of contention -= wonder how the standard will stand up - is the tomei diff -rear -worth buying - how much stronger is it realy ??

by the sounds of it youve spent alot of cash on a monster engine, wouldnt the best option be to build a driveline to maximise your money spent on the engine? sorry if its not on topic just made sense in my head lol.

by the sounds of it youve spent alot of cash on a monster engine, wouldnt the best option be to build a driveline to maximise your money spent on the engine? sorry if its not on topic just made sense in my head lol.

Yep your right- have PPG straight cut and NPC clutch - just want to know wether it is justified to spend the rest - sometimes you can spend money unessaserily just because some poelple just have to have name brands !?

i think i will need to up grade axles - diff - dun no?

  • 2 weeks later...
I know someone ran 9's with the stock diff and still stock axles on with his 8's

You will be fine. Change it only if it wears out/ need to :unsure:

Yeah we are running STD diff and axles...a good trick is to paint a thin white line on the axles....check them every now and then too see how much they have twisted. We will continue to run it like this till it breaks. I believe Mark Jacobsen was running a stock set-up too until just recently without any trouble.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
    • Hey guys. New here. I am having an issue with my hr34. The fuel pump isn't turning on. I removed it from the tank. Bench test it. Wasn't working. Order new one and installed it today. Still not turning on. Checked the relay. Relay has voltage on the contact side. I jumped it and it tuned the pump on. Which lead me to checked the coil voltage.  Turned on the ignition and had my meter across the coil and there wasn't any dc voltage. Had my meter lead on the positive and I used the frame ground and noticed there was 12 volts. Which lead me to believe the relay isn't getting a negative signal. I traced the wire ( black with pink strip).it goes back to the bottom on the steering and it gets lost into the harness.   I checked at the ecm and I can't seem to find that wire color.   My question if any one knows is. Can I not just run the negative through a ignition relay to turn on the fuel pump relay?. Or anyone ever had this issue and if so how did u go about fixing it.    
    • So many people don't notice it, as batteries decay slowly over time. Two big reasons people end up noticing and needing to replace batteries: 1) The cold weather. The cold not only makes it harder to turn the engine for a few reasons, but it also increases the batteries internal resistance. So this means you need MORE power to turn a colder engine, AND the battery has a lower limit on how much current it can provide. 2) Something gets modified/altered/added in the wiring, typically an aftermarket accessory, like a dash camera, or an alarm etc, and this adds a small amount extra onto the battery, and pushes it over the edge in its failing days. But if you hadn't have read this thread, and just pushed through, chances are you might have made it through this winter, just. But come next winter, it would have been kapoot. But the fact you changed it out now, means you've instantly noticed how much nicer it is for starting, and will be less worry for you that the engine won't start now.
    • Holy shit, I'm glad you brought up the battery issue and I'm glad I asked about measuring it. Old battery was at a healthy 12.82V in the morning with the car turned off. Removed the fuel pump fuse, clamped the multimeter on at min/max/average and cranked for ~3 seconds. It dropped down to 8.30V. So yeah, not surprising it struggled that much. Picked up a fresh battery from supercheap and it's ridiculous. Haven't done a cold start yet, but man, even with a warm start the difference is night and day. I can't believe I lived with this for so long. Just blamed it on it being an old modified car. Went with Century because convenient. If they are shit it'll be a future me problem. But just in case I set up a reminder for 30 months - 8 weeks to check on the battery state and get a warranty replacement if necessary. 
×
×
  • Create New...