Jump to content
SAU Community

Recommended Posts

Hi All,

I'm a medium time lurker, first time poster.

I am finally taking the plunge and buying an R32 GTR.

I should pick it up on Saturday(Tomorrow)....details and pics can be seen in the buyers post here:

http://www.skylinesaustralia.com/forums/in...=147526&hl=

So it is with much anticipation, excitement and a bit of "oh my god, how much is this actually gonna cost me to maintain", that I say hello to all.

I look forward to sharing experiences, knowledge and cruises with you!

Fraser.

Link to comment
https://www.sau.com.au/forums/topic/159724-one-more-sleep-to-go/
Share on other sites

nb, but 30k for a 32 GTR? I suppose its had good engine work done to it, id love that engine personally, but the suspension looks to be stock along with the ride hight, and it needs the rear wing.

That being said the interior looks shmick and it looks to be in top condition, good buy man :D wana swap? :)

man looks bloody awesome!

just remove that tape / whatever that is making those terrible eyelids on the front headlights and you have yourself a beast

nice to see some good GTRs going around.. its terrible the amount of shit quality GTRs selling for cheap these days.

Congratulations on your purchase Fraser :D

If you open your wallet right now and you currently have money in there, take photos as you'll probably never see money in there again :(

Welcome and enjoy!

Cheers,

Karen

PS. just joking about the wallet thing...looks like you have yourself a very nice machine ;)

Nice Gtr good luck with it, oh defective on pilar guages, in sight of a crash impact zone, just remember that you can get defected for it. Part from that welcome to the skyline world, and hope to see ya on some cruises. Just dont turn to the dark side and goto BC :|. Sau is the place to be

DAMN it a RICE gtr.. ewww

looks good. u got urself a VSPec 2 which supposively is no better than the garden variety.. just different large brakes. and suspension and styling mods.. well worth it in the end.. 2-5k just for a badge..:)

And active diff!

Nice car engine wise...not loving the white bits inside but hey I would live with it for the engine!

And active diff!

Nice car engine wise...not loving the white bits inside but hey I would live with it for the engine!

and lets not forget the far quicker processing attesa computer. . . . .

The vspec version of all the gtrs is a far better car, especially at the track and in wet condition and they are MUCH easier to drive. . . . . Not to mention the how rare a genuine 32 vspec 2 is to find. Good buy mate, It is basically a 32 gtr with 33 gtr vspec running gear, great combo.

Thank you all for the encouragement and advice.

I like the white interior...but we'll see how easy it is to live with. The rear wing has been put back on so i'll see which I prefer (on or off).

Oh, and I do not beleive it to be a VSpecII.

While it has the brembo brakes strut braces, I'm sure the vspecII's didnt come out in '92.

The only remaining way I have is to check the codes printed on the attessa controller methinks....

To me, The brakes were the most important part of the VSpec.

I'll let you know how it goes!

Cheers

f

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...