Jump to content
SAU Community

Recommended Posts

Looking at booking a 6pm virgin flight to cbr leaving at 6pm sunday evening, will i have enought time to make it there? race starts at 2pm and goes for an hour forty, say finishes then at 4pm. Allowing 45 for check-in, can ill make it to the airport in 1hr 15? Can take a cab, though would prefer cheaper option.

Also, having never been to the gp here, where should i be looking to sit if gen admin? should i take foldup seats or just a rug or what? do you have to get there early to get a decent spot and mind it all day like i suspect?

Edited by neergnevets
Link to comment
https://www.sau.com.au/forums/topic/160103-f1-gp-do-i-have-time/
Share on other sites

You might be pushing it as I assume there will be large demand for cabs and probably large lines for the tram when it finishes.

If youre interested, I have two spare tickets for the Senna grandstand (one of which has been claimed by Beer Baron) which I am willing to sell at below 50% original purchase price to get rid of it.

No chance of making it to the air port... it takes 10 mins just to get out of the Albert Park! Cabs will be in high demand and there'll be A LOT of traffic in the area because so many roads are blocked off. Better off giving yourself an extra hour. Nothing worse than rushing like a mad man to go somewhere after such a big day.

if you're going Gen Admission, don't bother with the chair or rug unless you're gonna get there at about 6am to get a spot, and when the gates open you have to RUN.. so have the spot picked out beforehand

you will be standing otherwise.

As for the flight, I'd just be jumping on the early one back here on monday morning... like 6.30am or whenever it is.

Geez, you guys must have all gone to a different GP!!!!!

I got to the circuit about 8:50 or so, not many people about could basically sit/stand/lay wherever the hell I wanted.

As for leaving, I had to walk from one end of the circuit to the other.......and still caught the 5:20pm flight home.

What would you say were the good parts of the track???

General Admin wise the places to be are:

- turn 9

- turn 11 and 12 (especially in the wet)

- turn 13

- turn 15

All places have there own good qualities, and nearly all will provide some form of race day entertainment. Be it either an overtaking opportunity or a corner that is slightly tricky and you bound to see some carnage. Most will have a superscreen closeby aswll which always helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...