Jump to content
SAU Community

Recommended Posts

evening fellas

im having a crack at making a pair of length adjustable lower control arms for the front, and im wondering if anyone else has done anything similar. the design itself is pretty straightforward, however im a bit lost on where I can get rose joints, fat high tensile adjustment bolts and nuts ect. anyone (in brisbane mainly) know where i can get some, or better yet, a catalouge on these? Ive had a read of some general industrial parts supplies catalouges but they are pretty slim in this area.

these are r31/s13/r32 style lower arms

Link to comment
https://www.sau.com.au/forums/topic/160148-custom-suspension-arms/
Share on other sites

evening fellas

im having a crack at making a pair of length adjustable lower control arms for the front, and im wondering if anyone else has done anything similar. the design itself is pretty straightforward, however im a bit lost on where I can get rose joints, fat high tensile adjustment bolts and nuts ect. anyone (in brisbane mainly) know where i can get some, or better yet, a catalouge on these? Ive had a read of some general industrial parts supplies catalouges but they are pretty slim in this area.

these are r31/s13/r32 style lower arms

rose joints u should beable to get from a bearing shop (well i know pine river bearings in brendale sells them) as 4 hi tensile bolts try a nut and bolt shop

Just a question... why does it need to be adjustable?

We modified the lower control arms on an AE86 to achieve a higher camber angle on the front. This was made after taking the required measurements to work out the extra length needed. then cut up 2 sets of lower control arms and then welded them together with appropriate reinforcements.

Just a question... why does it need to be adjustable?

We modified the lower control arms on an AE86 to achieve a higher camber angle on the front. This was made after taking the required measurements to work out the extra length needed. then cut up 2 sets of lower control arms and then welded them together with appropriate reinforcements.

why

coz its easier and u can adjust the set up to your needs

as the set ups between street, drift, and drag are all different

funny you should mention pine rivers bearings as thats where i was going to say to get them from....they supply us at work. But any bearing shop should be able to get you rose joints.

yep pine river bearings are great for import bits

they do timing belts and idler and tensioner bearings for ca18 and rb20/25/26 and there as cheap as

why

coz its easier and u can adjust the set up to your needs

as the set ups between street, drift, and drag are all different

Easier?

i can understand the want for adjustability, but if im not mistaken the R31 has not got double wishbone suspension, so adjustment can be fine tuned via a strut top adjuster rather than a lower control arm modification.

Easier?

i can understand the want for adjustability, but if im not mistaken the R31 has not got double wishbone suspension, so adjustment can be fine tuned via a strut top adjuster rather than a lower control arm modification.

like i said it makes the car easier to set up(esp for track work) as in qld u need to get a mod plate and a engineers report if u shortin (buy cutting and welding) any suspension conponments

your right craved r31s use mac struts and you can adjust camber though the top hat, but you cant adjust track. plus adjustability is neat, id hate to make a set of arms up and find out they are way too long or short. im keen on experimenting on what the cars liek to drive with it and with some fiddling to set it right.. plus the whole wanky drift cred yo thing

these arent going in a road car so engineering isnt really a concern.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...