Jump to content
SAU Community

Recommended Posts

Should be much cheaper at a wrecker. Not sure if 33's are the same. Would have measure them up or get in the FAST thread in General Discussion and ask someone to look up the part numbers for both R33 and R34. That's how I've confirmed a part being the same before.

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-2983554
Share on other sites

  • 1 year later...
S15 diff bolts straight in...did that on an R34 a little while ago

Thanks Dan,

Was flipping back thru past threads and got to pg.42 before seeing your post! Haha

Understand need to use back the R34 half shafts and only concern is the final drive ratio for the S15 being 3.692 as against 4.083 & worried that the pinion and crown on my diff could be worn after 300,000km causing loud 'hummings' even after changing to Cusco semi-syn 80-140 lsd oil.

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-3770387
Share on other sites

Hi Dan,

Just check with you - any issues with the S15 diff box in respects of the final drive ratio and the helical lsd components being different with the R34's(viscous lsd) - is there a need to swap ovr the final drive and if there's any effects on the autobox's ecu?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-3786416
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...