Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

hey guys was browsing forum found this thread, i recently took my car to aaron as a stocker only had pod filter and 3inch stainless turbo back zorst that i did myself already, for me he fitted apexi turbo timer, safc, fuel pump, piller mount and greddy boost gauge, GFB mach boost controller, FMIC, fuel filter, and dyno tuned my car run a tune into safc, done all this for $939 car come out at 286.9 rwhp at 12psi with faulty coilpacks, was very surprised at his knowldge recommend Aaron as he did a great job on my car and he is very straight foward :).

hope this helps guys,

Adam

Hmm, I thought I would give them a go, cos Lumpy isnt tuning any more, and so many people on here have had such great results

I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

Personally I dont want to see they guy again, hear or speak to him. I feel a bit screwed after my experience there - if you know what I mean.

Just chalking it up to a very expensive lesson learnt.

who did the fix it up for you steve?

i had issue with my 1st tune, and have since took the car to all-star and been very happy with the results :huh: maybe give them a go. if ur interested i can shot u a pm

  • 1 month later...
I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

If you have an issue with any tune/work done you should go back to the guy first. I understand why your pissed but at least talk to the shop and see if they will fix it for you ($0). If that doesnt work go somewhere else THEN bag the shop.

You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

  • 4 weeks later...
You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

No worries buddy the advise is free. Ive heard some mixed result from Aaron some love him others dont. I wont be using his services any time soon.

Edited by SSidewayz

it's always the way... you'll likely hear good and bad of everyone.

there is one particular workshop i will NEVER touch again, but then others rave about it.

i do all my own mechanical work, but as yet, dont know who id get my car tuned by...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...