Jump to content
SAU Community

My Little Interior Project

Nightcrawler

By Nightcrawler,
in South Australia

 Share

Recommended Posts

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Well now I have done the Ultimate Trim 'leather' interior, I thought it was time to make a custom gauge panel for the spare DIN spot in the R34, put in some of 666dans blue leds into the dash cluster, and cut out the ash tray and integrate the SAFCII into the dash.

I plan to go a little bit more crazy with the carbon fibre, and may well re-do the bits I have done as some of it is a bit rough and better techniques would give a better result.

I thought I'd share these photos for your enjoyment.

interior.jpg

close-upflash.jpg

longerlightson.jpg

lightson.jpg

closerflash.jpg

blueledswithindicators.jpg

blueglobesclose.jpg

I will get some better photos in daylight today also.

Link to comment
https://www.sau.com.au/forums/topic/161278-my-little-interior-project/
Share on other sites
Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

Thanks guys. Like I said I am going to make some small improvements but am quite happy with it overall. The device on the top right is an M350, which is a digital speedo with 0-400m, power reading, lap times etc, but I haven't figured out the Japanese instructions to get it all working yet.

I haven't actually got the Hybrid solenoid hooked up yet - it is wired through to the engine bay, but I haven't had time to plug it all in. I used the older model of this one and it was very good - so I expect this one to be as good if not better.

The dash lights take under an hour to install. The hardest part is getting the cluster out - it is a p.i.t.a if you don't remove the steering wheel (like I didn't).

32 4whore Experienced

32 4whore

Posted
Posted (edited)

Andrew what does the p.i.t.a stand for?

And Paul. i think the HP gains with just the interior the way it is now is massive. like adds 98rwkw with just these mods itself. LOL Jokes.

It looks really good Andrew. Figuring out what to do to my interior to make it look more pretty.

Edited by R32_4door_drifting
Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

hahahahahaha beat me to it :(

Thanks Brenton :ninja:

and Pauly, the Hybrid won't actually add any power, it will just make boost come on earlier, stronger and more controlled. I have also bought an HKS actuator which I will fit with my new turbo that will aid this also.

Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

yeah Joel it is is just the $40 per roll carbon fibre contact style stuff from Autobarn. I actually wrapped it around the edges and stuck in under the trim, but will re-do it with the edged trimmed to the edge of the trim rather than folding under - I am sure it will look better that way, and be less prone to bubbles and ripples like it has now.

Whiplash Grand Master

Whiplash

Posted
Posted

come up good Andrew, cutting it should stop it from bubbling. Have to find my self saw real carbon fibre i had a roll a while back but it ended up "dissolving" and you end up with black carbon hand prints every where after handling the stuff

Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

yes, real carbon fibre would be nice! There is a mob in the Eastern states somewhere that can paint items to look and feel like carbon fibre, but from memory they were up to $100 per trim piece. Since I am going to do the whole vertical centre console, plus the power window surround thingo, it is too much $$$. I will try different techniques with the carbon contact and see how it goes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...