Jump to content
SAU Community

Recommended Posts

hi all i am back on land of the skyline but now with r34 gtt auto i recently put on the following

e manage ultimate with ignition adaptor and set to 12v

with complete universal loom

specs are

nismo fuel pump

blitz 540cc injectors lag set to 1.02 and .60 for stock

and new roller bearing turbo unit with steel turbine

the problem i am having sometimes you can struggle to start

1 .when it start it idles fine etc but it has slight misfire once evry few seconds but revs very clean

2 . one you drive it after few minutes tcs and slip light will come on and stay on and canot switch it back on and sometimes it will stall

also how do i remove fuel cut

any help would be greatly apreciated

thanks

hi i found out why i am having problems see if anyone can help me in anyway . if the car slows down to 50mph i get check engine light come on for 1 second then go off this uts a airflowmeter tfault and causes tcs to stay on,

what i have noticed is that wen car gets to 50mph for a split secont the output afm signal go to 0v wich causes the problem

any ideas

  • Replies 765
  • Created
  • Last Reply

Top Posters In This Topic

hi i found out why i am having problems see if anyone can help me in anyway . if the car slows down to 50mph i get check engine light come on for 1 second then go off this uts a airflowmeter tfault and causes tcs to stay on,

what i have noticed is that wen car gets to 50mph for a split secont the output afm signal go to 0v wich causes the problem

any ideas

Either the wiring has a fault or more likely the afm has a loose connection inside. If you are handy with a soldering iron you could probably fix the dry jointed AFM pins, do a search for the "how to", or just replace it.

Either the wiring has a fault or more likely the afm has a loose connection inside. If you are handy with a soldering iron you could probably fix the dry jointed AFM pins, do a search for the "how to", or just replace it.

but why would it only do it at 50mph as it does not do it any other time

does anyone know, with the 'external switch', it is a 3.5mm jack, which has 3 pics on it. does the EMU need to see continuity between two of these to switch over, or do i give 12v to one of them? if so which particular pin?

has any one got a base tune for emanage blue rb25det. really need one asap.

no such thing, just delete the tune in it, once deleted car will run like std.

have you got the software and special cable?

delete all the info in the ecu, and only set the injector adjustment it is also in the software just put i the before and after sizes.

no such thing, just delete the tune in it, once deleted car will run like std.

have you got the software and special cable?

delete all the info in the ecu, and only set the injector adjustment it is also in the software just put i the before and after sizes.

how do i wipe the entire tune? do i set all values to zero or is there a menu? yes i have the software and the cable, and yes i have a basic understanding of the software.

how do I wipe the entire tune? do I set all values to zero or is there a menu?

I gather I don’t need resistors on the injectors (JECS 550cc) high impedance? Any modifications to the coil packs S2 built in igniters, they are yellow jackets.

Jumper settings:

1 – 1/2

2 – 1/2

3 – 1/2

4 - open

5 - open

6 - open

7 -1/2

Dip Switch – 7 / 0 / 1 (it has a z32 afm)

Other 5 dip switches are set to 0.

Also there are two others internally next to the 5 blue ones which are also blue, VR6 and VR7 what do these do, there currently set for 0 could not find anything in the manual.

Cheers,

dave

needs more EMB info:

Jumper settings inside the E-manage:

JP1 Ignition input pullup/pulldown select

1-2 A resistor is pulled down to ground

2-3 A resistor is pulled up the +ve rail

* Use 1-2 when the ECU's driver transistor is connected to ground

* Use 2-3 when the ECU's driver transistor is connected to +ve (5V or 12V will determine JP2's setting)

Supposedly you can see the input voltage in the Main Unit Setting Information window. If it's 0v, use 1-2. If it's 5v or more, use 2-3.

JP2 Ignition output select

1-2 Output resistor connected to +5V

2-3 Output resistor connected to +12V

* This will depend on the ECU ignitor signals output

* JP2 enables the e-manage to duplicate the amplitude of the original signal

JP3 airflow/VTEC output select

1-2 2nd airflow meter

2-3 VTEC

* Even if you don't have a 2nd airflow meter, leave it on 1-2 for non-VTEC applications

JP4 airflow/VTEC input select

1-2 VTEC

2-3 2nd airflow meter

* Even if you don't have a 2nd airflow meter, leave it on 2-3 for non-VTEC applications

* On 1-2, enables pulldown resistor (for use as VTM signal). This is required because the VTM output is inverted with the VTEC out.

JP5/JP6 Sub injector drivers

Jumper off - Disabled

1-2 - Enabled

* Only enable if you're going to control extra injectors with the E-manage

JP7 VTEC

1-2 Non-VTEC

Jumper off - VTEC

* On 1-2, enables pullup resistor (for use as MAF output)

what should jumpers on emanage blue be set to for series 2 rb25det?

my guess would be.

1= 1-2

2 = 2-3

3 = 1-2

4 = ? jumper off (there is only 2 pins)

5 / 6 = jumper off

7 = 1-2

Edited by 32_Dave

The car wont start at all but if i remove the ecu and re install standard it starts but is flooded so fuel is getting in. whats the difference between crank angle and cam angle sensor? it says on the loom for both of these but the numbers on the ecu correspond with the 1 degree and 120 degree crank angle.

  • 1 month later...
There has been good and bad reports about the emanage in the past, Some people have ignition timing irregularities...

Hi guys, there seem to be a lot of people who have used the EMU with success so was hoping someone might be able to help out a Greddy Emanage newb - please bare with me if this turns out to be something silly. I am helping a mate who is running an E-Manage Ultimate in his Honda, neither of us have used one before and hardly anyone in NZ seem to use or know much about them.

The setup process all seemed pretty straight forward, and for the most part it seems to work fine (fuel/timing adjustments seem to work as expected, datalogs look otherwise sensible, after a bit of adjustment to suit the car mostly drives and idles fine despite having 60% bigger injectors/big cams etc) aside from where we get fairly erratic timing on datalogs as the RPM increase, I am sure its not a representation of the factory map. Basically timing jumps back 10+ degrees and rpm seems to drop (even if vehicle speed is static or increasing) within a single log entry once it reaches around 4000rpm. This is felt as a bit of a misfire when driving.

We've replaced potential points of failure in the dizzy and checked for dodgy earths to no avail - and I've just had an from someone who tried to dyno tune their Supra running an EMU last week who is also getting jumpy ignition logs, I've not spoken with him yet but given the EManage is the common factor on something similar I thought I'd see if anyone has encountered the same kind of thing... or more importantly, fixed it?

We are hoping to get it on the dyno next Saturday but am not going to do anything with this issue floating over our heads, so any input would be greatly appreciated :)

Thanks!

  • 7 months later...

Hey guys, long time reader first time poster.

I recently installed some nismo red side feed injectors into my skyline and am having trouble adjusting the latency settings in my emu. I can't get the car to start and run properly and was wondering if someone could shed some light for me as this is becoming tedious.

Hey guys, long time reader first time poster.

I recently installed some nismo red side feed injectors into my skyline and am having trouble adjusting the latency settings in my emu. I can't get the car to start and run properly and was wondering if someone could shed some light for me as this is becoming tedious.

lol, EMU's are tedious fullstop, i spend alot of time fixing up screwed EMU tunes...

you should be able just to input the injector size correction and fine tune the latency from there.

when i exported the tune from the emu it had 280cc (seems wrong) and 0ms latency in the settings, I changed that value to 370 and put in 740 and .2 for the latency, but she won't fire up, just cranks....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...