Jump to content
SAU Community

Jun Oil Pump Preasure To High

RB26zcar

By RB26zcar,
in Engines & Forced Induction

 Share

Recommended Posts

Dobz Experienced

Dobz

Posted
Posted

you might have two springs in your pressure regulating valve on the oil pump.

i've noticed in my oil pump that there are two springs in there one is the main spring which controls the pressure and the other one sits inside it and is alot stiffer and a bit shorter than the main one so when its cold or at high revs the main spring compresses and then hits the second stiff spring making the oil pressure skyrocket.

the gallery restictors will be contributing as well.

RB26zcar Enthusiast

RB26zcar

Posted
  • Author
Posted

Cool then.... I'm good to go. I just put a adjustable valve on my oil inlet hoses to reduce the volume going into the turbos. I unhooked them while at idle and let them flow into a cup to measure the oil volume. It was quite abit still, even though I have the restrictors that come in the center section.

After a few spirited runs, it has taken care of the excessive oil flow through the BB turbos...

  • 1 year later...
RB26zcar Enthusiast

RB26zcar

Posted
  • Author
Posted

Its been a little over a year now and she's still running strong.

I have to admitt a boo-boo I did, causing the oil problem I described in the beginning posts. I was having oil coming out the comp housings, and I discovered that I had hooked up a new oil catch can, but did not vent it.

I ran a -10 line from each valve cover to the can only, and the can was not vented.... Doh

So, once I discovered that little screw up, I opened up the catch can, and added a filtered vent and everything cleared up....

Just wanted to update this thread since I've been absent all this time.

Later - and thanks for the help!

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...