Jump to content
SAU Community

Recommended Posts

Hey all I'm considering getting a Power FC and a set of Adjustable cam gears for my R32 GTR and was wondering what kind of power gain will I get from that. The car currently is making 240 rwkw on 14psi. It has N1 turbo's and cams. Also approx how much would I be paying for the power FC and hand controller.

So the ecu is remapped?

Must be. Sorry havn't really had a chance to have a good play around with the car since I've had it and it's sad cause I've had it for 4 yrs now and done all of 9000km it, So I'm only really going on what the guy I bought it off of told me.

Yer either way.. The PFC is the next step if you want to try keep up with Andrew. :)

I can't wait to get home and check that thing out. I think i'll go ahead and get a Power FC I'd love to get it up around the 300 mark that would keep me happy for a while.

As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

Sorry not knowing much about these what is the jetro and what are the difference's????

main diff with the D Jetro to std PFC is it uses MAP sensors and removes your AFM

just incase you dont know... MAP = Manifold Absolute Pressure and AFM = Air Flow Meter

RellikZephyr

Edited by RellikZephyr
As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

292rwkw's on standard gtr injectors? do you have a fuel pressure regulator? what dyno was this on?

Edited by mr_rbman

Ash,

They 'should' do it with around 43-45psi base pressure and close to 100% duty. 43.5psi they flow 520cc's & 40psi 480cc's. Well mine did so yours will be no different.

I'm unsure if the GTR's as standard run a slightly higher base fuel pressure.

Did 292rwk's on peter halls dyno. Have seen them do 299rwk's on tilbrooks dyno but was running a bit lean .

As cubes said though , getting very close to full duty. As far as the pressure , unsure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...