Jump to content
SAU Community

Changing Steering Wheels

phenline

By phenline,
in Exterior & Interior Styling

 Share

Recommended Posts

phenline Mentor

phenline

Posted
Posted

ok in a couple of days new steering wheel should arrive and boss kit. What is teh first step to taking my old stock wheel off and attaching the boss kit. Are there any guides? i searched couldnt see. what tools would i need.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/162194-changing-steering-wheels/
Share on other sites
phenline Mentor

phenline

Posted
  • Author
Posted
it is not recomended for cars with airbag..it'll might pop out while changing severely injuring you, may even kill you...think again

well that shouldnt be a problem :dry: i don thave an airbag

95SKY Community Regular

95SKY

Posted
Posted

you will need a steering wheel puller its the easiest way you can do it by far, probably pick one up from repco or something for a few dollars?( ive seen some people do it with a Punch and Hammer Not recommended tho, dodgy way) make sure you leave the nut on at the end of the thread so it doesnt hit you in the face when it pops off .Its pretty straight forward once you take the old one off fit boss kit, clip on wire for horn then screw the steering wheel on to the boss kit, very simple and the boss kit should come with some sort of instructions :(

Munkyb0y Grand Master

Munkyb0y

Posted
Posted

the horn cover on the series 1 wheel comes off by pulling it. it feels like it wont, and then click, it pops off (the first time i did it i was looking for screws on the back, there are none).

you'll have a hicas boss kit. make sure you line it up straight when u put it on. ive heard ppl had the hicas light come on the dash when its put on wrong.

Fry_33 Proficient

Fry_33

Posted
Posted

As 95SKY said, leave the nut on the end of the thread for safety to save a broken nose. Then put a hand on each side of the wheel while sitting in the seat (I move the seat forward so I'm nice and close) and pull hard while 'shaking' the wheel. It won't come off if you just pull it, you need to shock or work it off so 'shake' it, ie alternate the pulling force from left to right side.

If needed get someone to hit a punch on the end of the thread as you're doing this to help.

Good Luck

  • 2 weeks later...
mr_squiggle_1 Collaborator

mr_squiggle_1

Posted
Posted

Hey guys just picked up a free boss kit and steering wheel, the boss kit fits a cressida but it fits my spline on my 32 gts also, the question i have is does the plastic assembley with the brass plate inside it (located just behind the stock steering wheel) come apart so i can get my horn working with this boss kit which has a brass ring which is meant to fit onto and brass plate for the horn... seems to have a few clips and everything but i didnt want to pull on things too hard incase it broke and didnt actually fit my boss kit. Has anyone encountered a similar problem? and have a solution other than buying a new boss kit cos im poor as and thats not an option at the moment.

Thanks in advance, Steve.

GTsauRus Community Regular

GTsauRus

Posted
Posted
ok in a couple of days new steering wheel should arrive and boss kit. What is teh first step to taking my old stock wheel off and attaching the boss kit. Are there any guides? i searched couldnt see. what tools would i need.

Thanks!

hi

the puller to use is a plate puller that bolts on using m6 bolts then the centre screw pushes on the steering shaft to remove the wheel.. its a handy tool because it is also used to remove the harmonic balancer off the motor with no damage[timing belt replacement].

if you have an r32 the straight ahead position sensor is different on early and later models so make sure when the wheel is straight that the big slot in the sensor wheel is inside the opto trap or else after 10 minutes of freeway driving you will get the warning light because the straight ahead signal will be not recieved too long. It wont happen in the suburbs because you are alway turning the wheel you will get the straight ahead signal when you are turning.

mr_squiggle_1 Collaborator

mr_squiggle_1

Posted
Posted
Hey guys just picked up a free boss kit and steering wheel, the boss kit fits a cressida but it fits my spline on my 32 gts also, the question i have is does the plastic assembley with the brass plate inside it (located just behind the stock steering wheel) come apart so i can get my horn working with this boss kit which has a brass ring which is meant to fit onto and brass plate for the horn... seems to have a few clips and everything but i didnt want to pull on things too hard incase it broke and didnt actually fit my boss kit. Has anyone encountered a similar problem? and have a solution other than buying a new boss kit cos im poor as and thats not an option at the moment.

Thanks in advance, Steve.

Nobody???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...