Jump to content
SAU Community

Recommended Posts

The tough decision has been made, and I have put the much loved car up for sale. I have decided to go for an upgrade and look into getting an R34 GTR, so after 4 years of joy (especially over the last year since the upgrades) it is time to let it go.

It is a '94 S1 R33GTS-T with 410.7rwhp (306rwkw). All mods and tuning by Hyperdrive Motorsport...

Sell with private plates R33GT, rego until 09/07. I have spent over $25,000 on it (stereo and mechanical)

The Go Stuff:

- GT3540R .82 Exh. housing

- Ceramic coated high mount manifold

- Turbosmart progate wastegate

- Turgosmart vee port BOV

- Custom 3" dump/front pipe with removable pipe from wastegate to become screamer pipe

- Apexi N1 exhaust

- Hybrid 600x300x100mm fmic

- Z32 air flow meter

- Sard 850cc injectors

- Sard fuel pressure regulator

- Bosch 044 fuel pump

- Apexi power FC and hand controller

- Apexi power FC boost control kit

- Tomei poncams

- D2 height/damper adjustable suspension

- Blitz digital compact IV turbo timer

- Defi control unit 1, with water and oil temp gauges on GReddy A-pillar gauge pod

The Show Stuff:

- Bride brix front seats

- 400r front bar

- Drift side skirts

- GTR rear pods

- Trust rear wing

- Carlsson RS 18" rims with 265/40 series tyres

- Nismo aluminium pedals

- Factory electric sunroof

- Clarion DXZ776MP head unit

- Alpine DDLinear front splits

- Alpine DDLinear rear speakers

- Custom made rear parcel shelf

- Alpine PDX-11000 mono digital amplifier

- Alpine PDX-4150 4 channel digital amplifier

- 2 x Alpine Type R 12" subs

- 1 farad capaciter

- Custom made boot install with red LED's

$23,000 ono

Car is located in Melbourne, Victoria

Jason

[email protected]

0401 269 550

Pics by Jun Sawa

post-15008-1203423399_thumb.jpg post-15008-1203423458_thumb.jpg

post-15008-1203423662_thumb.jpg post-15008-1203423496_thumb.jpg

post-15008-1203423533_thumb.jpg post-15008-1203423570_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/163516-306rwkw-r33-gts-t-for-sale/
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 5 weeks later...
  • 2 weeks later...

hi very nice car would buy if i had the money.

just a quick question how much did the boot setup cost you as im looking at doing something very close to yours.

just the pricing for the alpine mono block type R subs and the instalation.

cheers!

  • 1 month later...
  • 4 months later...
Hey, good luck with sale. Hate to whore your thread, but noticed your Zoom mag feature. Is your AFM mounted in the IC pipe?

yeah mate, AFM in down behind the bumper on the drivers side of the cooler :rolleyes:

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...