Jump to content
SAU Community

Recommended Posts

recently got an Apexi AFC NEO from Aaron, and got it installed and tuned last thursday by hills motor sport.

little did i know before hand that it turns out that the turbo i have is actually hi-flowed, so i ended up with some rather nice results.

the first run is the lower line and each line further up is each power run as he was tuning the car. the final 2 higher ones are on higher boost, which it runs now.

post-22516-1175880482.jpg

Link to comment
https://www.sau.com.au/forums/topic/163533-apexi-afc-neo-tune-results/
Share on other sites

would it be able to support more psi? i'd think at 16 we'd see some sexy looking kw

im not sure if it can or not.. would have to ask about that. id love to have more power though haha

wait wait..... so what mods do you have on the car?

And any idea on what the difference is between an AFC NEO and a normal AFC?

mods at the moment are, front mount, pod, boost controler, cat back 3" exhaust, hi-flow turbo and now the AFC Neo.

not a clue sorry, ive never used the older type one. all i know is that the AFC Neo is the latest one in the range.

if you go to the apexi usa website, it'll show you about it there.

Yeah I did find info saying that it combines what the SAFC and the VAFC do in one unit.

It's all very interesting to me, as I was told that you couldn't run a hi-flow without changing to proper tuning and bigger injectors and AFM, but I've since found plenty to say that is just bs. Now it makes me worried about going back to a mechanic who is actually extremely good at what he does..... I hate having to change mechanics :yes:

Yeah I did find info saying that it combines what the SAFC and the VAFC do in one unit.

It's all very interesting to me, as I was told that you couldn't run a hi-flow without changing to proper tuning and bigger injectors and AFM, but I've since found plenty to say that is just bs. Now it makes me worried about going back to a mechanic who is actually extremely good at what he does..... I hate having to change mechanics :)

im not sure about that, like if i was to run the hi-flow at as hi as it could go, im sure id have to do some more changing, like as it is, the fuel cut sometimes kicks in (hopefully getting that looked at and fixed on thursday).

like it goes well, but i bet with a better AFM and bigger injectors, it would be a lot better

Looks awesome, can we get a copy of the AFR posted?

wish i had one mate, didnt get a print out though sorry.. i will ask to see if he still has it on the computer when i go back on thursday. hes taking the car for a street tune as its only been dyno tuned.

Mate how much was it to tune the Neo? ive been eyeing one off for while now, nothing too extreme so suits me well.

Also, where did you locate the display panel?

well i partly installed the neo (ran the cable and put it in the dash) the rest was done by hills. it cost $405 all up which was good. good tune, just some small bumps to iron out now that ive found when driving on the street.

i mounted the display in the dash just bellow the cd player

post-22516-1176212713.jpg

i want to get some sort of cover to put over it so i can hide it if i need to.

Is it just me or is there a huge gap between the AT:26 and IT:61 thats 35degrees difference.

Time to take it to the drag strip and see whats it can run :laugh:

haha yeh there is, duno whats up with that.

yes would be good to take it down there to the drags. a friend on sau got 12.9 i think it was running semi slicks and 210rwkw, so id expect mine to be in the high 12's at best with the tyres it has now (265/40/17). although semi's would be very nice to run.

Do you have stock injectors and an adjustable FPR or bigger injectors? What fuel pump?

as far as i know (i say that becasue i had no idea i had a hi-flow, who else know whats been changed that i cant see).. anyway, as far as i know it has stock injectors which im pretty sure of, standard FPR, and im pretty sure its the standard fuel pump.

if it is all standard, im probably pushing its limits and anything more would need a FPR or something. 3" dump would be nice though. only 3" from the back of the cat.

  • 2 months later...

I am lookng at this mild tune up with the Neo when i install T04E turbo next week on my GTT. Hoping to bring down the fueling on the higher rev range. Do you think this unit is suitable? Have all the basic mods like FMIC, Oil Cooler, Twin core Radiotor, exhaust, etc. Appreciate feedback whether the NEO can do it's job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...