Jump to content
SAU Community

R33 Series Ii For Sale

elad_33
 Share

Recommended Posts

elad_33 Enthusiast

elad_33

Posted
Posted (edited)

Hey guys up for sale is my skyline, wanting to get a house/property soon so i need the funds -

CYA33

1996 Nissasn Skyline R33 Series 2

109500kms

Silver

Great Condition inside and out

Mods Include -

HKS Headgasket

GT 3566 SPL Turbo

HKS Exhaust Manifold

Tial Sport 44mm External Wastegate (Plumbed)

GReddy Intake Manifold

Greddy Blow Off Valve

HKS 760cc Injectors

Q45 Infinity Air Flow Meter

Large Bar and Plate Intercooler (ARE Intercoolers)

Blitz Air Filter

Custom Stainlesss Steel Intercooler Piping

4" Cold Air Intake

High Flow Mandrel Bent Exhaust (Custom Front And Dump Pipe, Nismo Cat Back Exhaust (Including High Flow Cat)

Apexi Power FC with Limited Edition Hand Controller / Tuner

Apexi AVCR Boost Controller

Heavy Duty Clutch

Alpine Stereo (Headunit & all Speakers)

Twin Intank High Pressure/High Volume Fuel Pumps

Upgraded Fuel System Wiring

Malpassi Fuel Regulater

18" Wheels (Dish on Rear)

Nismo Carbon Fibre Gear Knob

Just completed a compression test with 125psi on all cylinders (low comp headgasket), Healthy motor and gearbox, custom intercooler piping and Cold Air Intake piping. All tuning completed at Charlies Motors in Brisbane

Always garaged at night and on weekends, only driven to work and back (10km round trip)

Paintwork Is perfect, feels like glass, just recently had a cut, polish and wax (all meguiars products) and then had paint protection applied (Inside and Out)

Just recently gave car a Full service with - Oil, Oil Filter, Fuel Filter, Gearbox Fluid, Clutch Fluid, Brake Fluid, Powersteering Fluid, Coolant.

Also just recently had a 4 Wheel Balance and 4 Wheel Alignment. Just also put 6 Months Registration (Upto October 2007)

Brake Pads have Plenty of meat left, Tyres just recently replaced with (Nangkangs On Front, Toyos on Rear). Turbo great, no shaft play etc like brand new

Have also just recently installed a Top of the Range Mongoose Alarm System (3 Point Immobiliser etc)

Also comes with spare Standard Computer, Standard Injectors and Standard Gear Knob, Spark Plug Cover, Original "J" Pipe, Old Front Rotors (Need Machining) and HiCas Bar

Fantastic to drive, great cruiser and great performance car - running about 1.5bar, clutch fantastic to drive - not too hard, sunroof, abs etc all the features you want. Rego till October 07

Looking at getting a house soon, need the money. Plates included with sale (CYA33)

In the process of fabricating custom washer bottle / catch can, Roadworthy organised upon sale. Receipts for most items included

Can negotiate price with serious buyer, can remove spare items, rw/rego for cheaper price

Looking for 20,000 ONO

Car in north brisbane (burpengary)

Pm me for any questions or give me a call on 0430 165 020

Thanks Guys

Dale

post-36458-1176092043.jpg post-36458-1176091892.jpg

post-36458-1176092077.jpg post-36458-1176091917.jpg

post-36458-1176091941.jpg post-36458-1176092014.jpg

post-36458-1176091984.jpg post-36458-1176092106.jpg

Edited by elad_33
Link to comment
https://www.sau.com.au/forums/topic/163768-r33-series-ii-for-sale/
Share on other sites
elad_33 Enthusiast

elad_33

Posted
  • Author
Posted

Hey guys, previous owner said car puts out around 440hp, but I dont have any sheets or anything to prove it...

Not interested in swaps sorry, looking for the cash for my deposit

Thanks.

elad_33 Enthusiast

elad_33

Posted
  • Author
Posted

Hey guys, previous owner said car puts out around 440hp, but I dont have any sheets or anything to prove it...

Not interested in swaps sorry, looking for the cash for my deposit

Thanks.

elad_33 Enthusiast

elad_33

Posted
  • Author
Posted

Bump

Needs to go people, Bargain price for a series 2 with these sort of mods and features

$21 000 Or nearest offer.

Can go a bit cheaper for no rego, spare parts etc

elad_33 Enthusiast

elad_33

Posted
  • Author
Posted

Bump.

Cmon guys needs to go asap! Taking offers around $20,000

Registered until october, quality car....Any questions just give me a call, pm me or thread it.

Thanks

  • 2 weeks later...
elad_33 Enthusiast

elad_33

Posted
  • Author
Posted

Previous owner told me it made 440hp, I dont really have time during the week to go take it to get dynoed and I dont drive it enough or hard enough to worry about anything happening to it. Tune on the car is fantastic as it is i believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...