Jump to content
SAU Community

Recommended Posts

Hi, i got a problem with my r33 gtst.

When i drive the car and it hasnt reached normal driving temp i can rev it any way i want, but when it has reached normal temp it starts to misfire badly around 5000 rpms, earlier i had the CAS turned a fairly bit anti-clockwise and the phenomena occured around 4000 rpms.

Im thinking of trying to turn it even more clockwise (is in the middle now) to see if it gets any better.

Does anyone know what might be causing this??

Cheers!

-David

I was thinking...

Maybe its the sparkplugs anyway, cause i changed the ones i had to new ngk's some time ago.

Could it be that when the plugs get hotter and hotter they get softer and softer (the electrode anyway) so that the car starts misfiring easier, meaning that the gap increases easier?

Cheers!

-David

Edited by brother_david

Its easier to ignite a rich mixture then it is to ignite a leaner mixture, so it could be the coil packs with hairline cracks allowing the spark to find an easier path to earth.

Also you can't just turn the CAS or you cause your motor to detonate if you over advance the timing. Get a timing light and to it properly or expect to be rebuilding your motor soon.

Thanks for your answers :)

Im using heatrange 7, NGK's .11 mm gapped to .08 . Im getting em out tomorrow and checking the state of them.

Yea i know turning the CAS to much will cause the engine to detonate, only done small and short test , fortunatly a friend of mine is picking up his timing light any day so then ill be able to see what the timing is set to, i'm currently running it centered and not revving to much.

I took the coil packs out, cheking the state, when the car was standing still in the garage (for a couple of months over winter) Didnt find any cracks then but since i didnt have this problem before they might have come after taking it out again. If i have the time ill take a look at them again tomorrow!

The thing is when it starts to misfire it sounds like its running on 5 cylinders or something, not the same problem last time i had spark plug issues but then i was running different plugs.

Thanks again!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
    • Final thought for now. Obviously the reason I was in there was to check everything is OK cooling wise, pull out the radiator to flush it etc, but I have to say the factory has done a hell of a lot of thinking about air management in a way they never did back in the R chassis days. The Redsport/400rs have (from engine forward) 2 large shrouded fans - radiator (incl AT cooler) - AC condenser - Intercooler Heat Exchanger and Oil cooler. There are shrouds and foam around everything to keep it pretty well sealed, which is good in that they have it sorted from factory, and bad in that I can't make any meaningful improvements there. The second red sport pump water pump is mounted in front of the rad in the airflow, so I will see if there is somewhere else I can stash that (unlikely, it is tight in there). The horns which are also in the rad airflow will be moved somewhere else, and hey who needs 2 when 1 would work For track days, I can also remove the lights which would block some airflow. Factory has already taken the smart option of ducting all air that went through the oil cooler down and out of the engine bay. This pic is taken from below looking up, so air comes through the cooler at the top of the pic then hits the shroud and is directed down and out of the engine bay through the engine bay lower cover Which of course is good for oil temps, but doesn't help the rad as it diverts 10-20% of airflow away So, no big improvements to be made here, I'll flush the rad out and put it all back together.....    
    • It looks so incredibly busy in there! 😮 
    • Next..... That escalated quicker than an Elon and Donald break up! I'll post up a specific DIY for radiator removal on these, but all I'm saying is that if you get a workshop to change your radiator for any reason and they give you a $1000 bill for it, go and hug them and thank them for not charging all the hours it took.....what a bastard of a job. I'll make some adjustments as I put it all back for faster access in the future, but it was a nightmare.
×
×
  • Create New...