Jump to content
SAU Community

Recommended Posts

Hey guys, long story short, had my car dynoed when it was stock and it made 213rwhp and after a few mods i thought i would see what it is making, mods are 3" exhaust turbo back with screamer, FMIC, Pod, Splitfire coils, CAI, 040 pump and thats about it. Still running stock boost and it made 205rwhp? the thing is its not loosing boost, afr seem to be ok just richens up top (around 11's) the workshop told me possibly the clutch is slipping? doesnt feel like it to me as i can hold 2nd and 3rd gear slides, charts are attached. Any help would be appreciated.

Thanks

Brad

post-7636-1176605198.jpg

post-7636-1176605487.jpg

Link to comment
https://www.sau.com.au/forums/topic/164599-problem-with-r34-gt-t/
Share on other sites

So once the pfc it was tuned it was fine? i have found a couple of pfc's for sale at reasonable prices but spoke to Dr drift today and a remap sounds a bit cheaper and possibly a better tune?

So once the pfc it was tuned it was fine? i have found a couple of pfc's for sale at reasonable prices but spoke to Dr drift today and a remap sounds a bit cheaper and possibly a better tune?

hey mate sorry to hijack your thread but i was wondering how much are u being quoted to remap the ecu?

cheers

ah, you actually can not remap the ecu at all whatsoever...

if you know someone that does i think alot of ppl here in SAU including most of the experts would want to know how its done...

get ultimate or pfc as your cheapest and best ecus, otherwise get haltech, motech, wolf etc etc etc.

Fuel cut defender and an SAFC2 will do it too yeah?

ah, you actually can remap the ecu but as stated above it's not worth the effort or money, much better to go with an r32 item and a rev switch to control the vct..

ah, you actually can not remap the ecu at all whatsoever...

if you know someone that does i think alot of ppl here in SAU including most of the experts would want to know how its done...

get ultimate or pfc as your cheapest and best ecus, otherwise get haltech, motech, wolf etc etc etc.

Fuel cut defender and an SAFC2 will do it too yeah?

ah, you actually can not remap the ecu at all whatsoever...

completely wrong.

www.drdrift.com

"One of our rather unique talents is in the reprogramming of factory engine management in many cars. The factory Nissan ECU's have a huge potential whilst still maintaining all the factory features of economy, drivability, cold starts, and idle control."

many types of Nissan's can be remapped.

I'm trying to decide between remap and pfc

Brad: what sort of reasonable prices are you find for the r34 pfc's?

ah, you actually can remap the ecu but as stated above it's not worth the effort or money, much better to go with an r32 item and a rev switch to control the vct..

Thats what i thought...

my guess is the rubber hosing on the intercooler piping.. sometimes the suck closed under pressure.. sounds crazy but it happens.

No its not that, new ARC cooler and hoses are all new, plus the boost doesnt drop excesive

I'm trying to decide between remap and pfc

Brad: what sort of reasonable prices are you find for the r34 pfc's?

Around $1000 :sorcerer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...