Jump to content
SAU Community

Recommended Posts

hey guys,

I'm just wondering who with r34s on here have experienced bad coils? I've searched around and found problems with a missfire in the 4000 to 4500rpm on turbo cars but what do NA symptoms have? how can u tell its a coil and not a plug without physically inspecting it? reason I ask is mine is running like a dog (sounds like a WRX) and there is a lot of stuff to unplug to get to the cam valley to check.

so any help on what the symptoms are would be great I suspect its a coil but need some reassurance.

thanks

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/
Share on other sites

NA's with bad coils experience the same problems as their turbo counterparts. My last car was a ca18de and i went through about 12 coils on it. Car feels like it's missing a cylinder and sounds like a wrx but without any pull. There's a few threads on coil maintenance and cleaning, check them out.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056087
Share on other sites

Also can anyone tell me it is a coil from my symptoms?

Cold start is fine will drive around OK for a long time or short time its totally random. Engine light comes on car sounds like a WRX has poor accelertation etc. But when it is driving OK it does have a miss as well?

Any help would be great

Cheers

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056886
Share on other sites

Cold start is fine will drive around OK for a long time or short time its totally random.

Engine light comes on car sounds like a WRX has poor accelertation etc. But when it is driving OK it does have a miss as well?

Generally speaking, nissan coils generally get worse when they're hot. On my previous car, when the coils were bad they would generally be okay for about 30 minutes then it would sputter and the engine light would flicker as you say.

How many kms has your car done? has it ever had the coils replaced? I would definately give it a good clean, take out the carbon deposits on the tip perhaps give it a light sanding, silicone the boots and clean the leads. Come back and tell us if that helps solves your problem.

Investigate the possibility of going to splitfire replacement coils... I wish I had known about them earlier, that would've saved me going through a dozen coil packs.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056997
Share on other sites

Thanks again Howie will give that ago. Car has done 60,000k's Can they go around there? I have heard R34's are notorious for coil failure.

My first set went at 68,000kms on my last car.

It's not just R34 notorious for coil failure, it's basically any nissan car pre-2001 that uses the coil pack system. CA/SR/RB's.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3057103
Share on other sites

ive had my r34 for 7 months and had 3 coils go on me. in the end i replaced all of them with splitfires. its too costly too continue to replace each coil as they go. my r34 n/a has done 67,000. the last 2 times i lost the coils the car would be running on all 6 cyclinders, then lose a cylinder then gain it back etc. those two coils where showing a greater heat resistance to the others. hope this helps!

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3057915
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...