Jump to content
SAU Community

Recommended Posts

if its S1 R33 i think it would be the same as the R32s and its 0.6-0.9 Ohms.

and also check for cracks in them

ended up bein cracks in em, car runnin great at 13psi now. thanks for the help!

cheers

Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

what boost? could be hitting fuel cut but im guessing you have allready thought of that... check the coils yourself, cracks are barely noticeable and will not show that they are stuffed wen doing a resistance test on them. if you pull em off you will see a series of plates, cracks occor in the plastic just below that, its caused by heat under that valley cover that comes on the 20's and 25's from the factory....

worth a try before spending much loved coin trying to diagnose the prob!

hope it helps

cheers

hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

its pretty easy mate, if you pull 1 off you will see, its just got a series of plates and a plastic box (kinda) underneath. whem lookin at mine the hairline cracks were in the plastic bit. doesnt really matter where you tape up, as long as you can get em back on and bolted down. its really just a quick fix to find out if you need new coil packs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...