Jump to content
SAU Community

Recommended Posts

Hi all,

After selling my R33 gtst I have a few bits lying around the garage that I need to get rid of to make room for new projects.

Except for the car ramps, centre console and the rear wing, I am happy to send items at the buyers expense (I'm located in Melb).

As these prices are already bargain basement, I am pretty firm on them but feel free to make an offer via PM as long as a no won't offend! :santa: Also if you are interested in an item and would like more pictures, feel free to ask but please don't waste my time.

1. Stanfred Car Ramps - brand new, never used $60 -SOLD

Steel contruction, 750kg load rating per ramp, approx 210-220mm high.

2. Bendix Ultimate rear brake pads to suit R33 gtst - brand new $80 $70 -SOLD

3. Defi 60mm Gauge mounting pods x3 - brand new $10 each -SOLD

To suit BF series gauges...will probably fit others but not sure.

4. Spare Defi gauge parts - brand new $10 for the lot -SOLD

1x meter wire

4x solderless connectors etc to suit control unit II

5. Std R33 gtst BOV - $40 -SOLD

Perfect working order and only replaced with an upgarde aftermarket item.

6. Std series 2 R33 gtst rear wing - $70 -SOLD

Black in colour (KH3), no nicks but has a few scratches and will require a repaint. Note that when removed ALL L.E.D.S. in the brake light were in perfect working order. Also has light connector and both rubber 'gaskets' (see picture).

7. Std R33 gtst gauge cluster - $80 -SOLD

Removed at 86,481km and replaced with 320kmh item. Was in good working order.

8. Std R33 gtst centre console - $40

No scratches or nicks and in great condition. The lids latch was broken however it has been fixed and works well.

post-6243-1180056807_thumb.jpg

9. Autotecnica 340mm steering wheel - $140

Like new. Red/black leather. No sctratches or tears in the leather. 35mm thick wheel rim.

post-6243-1180056833_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/165678-garage-clean-out/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

^ +1 need a few more shots of the mounts and dimensions. PM meyour details. i'll take 1 now and test it out then take the others if all is good. yay 1 sold 2 me lol how deep is the actual mount anyways? jus wondering if can fit other gaues into there...where you located? i think might be better if i take all 3 now considering i gota pay postage if out off sydney...

Edited by bloodsword27

Hey guys,

The only shots I have of the cups with me are these:

post-6243-1182483568_thumb.jpg post-6243-1182483584_thumb.jpg

I don't have dimensions with me but they were supplied with 60mm Defi BF gauges. You stick the metal mount plate (red circle) where you want on your dash (is thin metal so will bend to suit shapes) and you use the bolt (blue arrow) to attach the cup on the angle you want).

As the ad says I'm located in Melb.

Bloodsword....err I'm getting a fair bit of interest in people wanting all three....if you want to take all three postage to Sydney shouldn't be any more than about 5-10bucks

Ah geez no interest in these items for weeks and all of a sudden theres a rush on :cheers:

Really sorry bloodsword, but when you didn't reply I agreed to sell them to someone else. Once again I apologise but I'll know in a day or so if that sale falls through and they are yours if thats the case

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...