Jump to content
SAU Community

Recommended Posts

Gdays it looks like the common cold idle problem has hit my car(94 R33GTST). As i start her up in the morning the idle either rises to about 1500-2000rpm straight away or as soon as i start driving and stop at some lights. This occurs until operating temperature is reached where it goes back to normal.

Now i have done some research before i ask this question and am just a little confused on something. Is it this cold start valve causing my problems (which i assume controls idle when cold) or the AAC valve (which i thought controlled idle along with the ecu/IAC valve when normal operating conditions are reached).As you can see im a little confused. Due to being a busy uni student i dont have much time pulling of everything and giving it a clean so i only want to go after what i/people think is the main problem.

Any help would be appreciated

Thanks

Link to comment
https://www.sau.com.au/forums/topic/166150-common-skyline-problem/
Share on other sites

Sorry should of been a little clearer, i mean once i start it, it will sometimes idle at its normal cold start value what your talking about but then i take it out of the driveway and drive it around for a little bit and then i stop at some lights and poah it shoots up to about 2000rpm while im sitting there and doesnt go down. Its like a valve forgets to close/open or something thats my problem and why im asking.

Thanks for the quick replies so far guys

Sounds like your automatic choke dude, although 2K RPM is higher than I'd expect it to sit on

agreed... a bit high... but none the less, it has been really cold lately... it doesnt use much petrol, and its mostly good for the car...

as long as it doesnt do it after like a 30 minute drive then your fine...

Thanks for the reply guys, well i could leave it for 5 minutes to warm up and then start driving then when i stop instead of idling at normal rpm's it will idle somewhere close to 2000rpm. I know its not a normal thing because i have had the car for like 3 years without this happening before. And it has also occured after like 20 minutes of driving just last night. So im very confused. I know about cleaning the AAC valve and that but is there a separate valve what controls the car at idle when cold or is it just the AAC controlling idle? If people could clear that up for me that would be great thanks. :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...