Jump to content
SAU Community

Recommended Posts

After writing off my first R33 (lesson learned, I won't do it again, promise!), I'm looking at another... I tried other cars but just keep coming back to the R33 :)

Anyhow. Have driven a few and some had the stock exhaust, I really liked the sound of it, so quiet.

I'm just wondering if I bought one and decided to keep the stock exhaust, what mods are worth doing? I've still got a powerfc from my old car, but I'm just wondering whether there will be much gains to be had in having it tuned? With say, an R34 SMIC and 10-12psi.

Or maybe there is a more free-flowing alternative available which doesn't add noise?

Sorry if this has been covered before, I searched for "stock exhaust" and didn't turn much up.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/167583-stock-exhaust-performance-gains/
Share on other sites

Yeah, I actually think the stock system sounds really good too. But if power is what you want it has to go, as far as noise goes you don't have that much of choice because aftermarket manufactures obviously design them to be louder for that sportier sound and better flow. What you could do is buy a decent 3" system off greenline.jp and add another resonator to reduce noise.

Edited by BAMR33
After writing off my first R33 (lesson learned, I won't do it again, promise!), I'm looking at another... I tried other cars but just keep coming back to the R33 :)

Anyhow. Have driven a few and some had the stock exhaust, I really liked the sound of it, so quiet.

I'm just wondering if I bought one and decided to keep the stock exhaust, what mods are worth doing? I've still got a powerfc from my old car, but I'm just wondering whether there will be much gains to be had in having it tuned? With say, an R34 SMIC and 10-12psi.

Or maybe there is a more free-flowing alternative available which doesn't add noise?

Sorry if this has been covered before, I searched for "stock exhaust" and didn't turn much up.

Cheers!

change the front/dump, and put a bigger cat - i think that would be a good start. I got the front/dump, large cat and the trust pe2 cat back...good performance gain, very quiet too. dynoed at 164rwkws at re customs.

get a front mount - just jap (for around 400), second hand apexi power fc ecu, tweek turbo to around 11psi - get a full tune. not sure what the power rating will be like though.....

someone can correct me if im wrong with those mods......(probably dont need the power fc - but most people have it)

i discovered a quiet exhaust is a pretty large restriction

i went from a stocko, to a blitz jobby with an extra muffler

was quiet as (missus request) but robbed me of a fair bit of power (around 30rwkw)

im running a 3" straight dump pipe, hi flow cat, and jasma approved cat back exhaust, its like 92dB on back off and 90dB on ramp up, has also a mid muffler and i had my sky tined last week at 168rwkw. only other mods are fmic, k&n panel filter and grounded out boost solenoid at 8psi. runs well enough.

guy i got the exhaust off said he had it tuned on his car and with it was still making 198 at the rears. IMHO, epa should go get fuc*ked. leave us to modify how we like as long as our pollution emissions are fine and the mods are rw. who cares if its a lil loud. ecu, pod, fmic, boost, wats it got to do with em. bloody poofters.

im running a 3" straight dump pipe, hi flow cat, and jasma approved cat back exhaust, its like 92dB

good for you, but your opinion is irrelevant here. 92dB is a long way from being quiet, in fact 84dB is the cutoff for continuous exposure without hearing damage. if you want to beat your chest about having a loud exhaust find somewhere more suitable.

  • 2 weeks later...
Fujitsubo make excellent exhausts for what you are after. They are quiet at idle and at cruise and have a decent sound when on full song.

My old R33 ran a Super Ti from memory, was great.

Thanks I will look into that.

I'm going to see if I can get the exhaust off my wreck and repair it. The front pipe and cat looked fine, but the catback was dented and the muffler a bit squashed... don't know how much it's going to cost me. Might have to replace the muffler altogether?

Is there much point just putting split dump/front pipe + hiflow cat on? Might free it up a bit without being noisier.

good for you, but your opinion is irrelevant here. 92dB is a long way from being quiet, in fact 84dB is the cutoff for continuous exposure without hearing damage. if you want to beat your chest about having a loud exhaust find somewhere more suitable.

Any idea how many dB a stock exhaust system would be?

Edited by bombastic
  • 2 weeks later...
good for you, but your opinion is irrelevant here. 92dB is a long way from being quiet, in fact 84dB is the cutoff for continuous exposure without hearing damage. if you want to beat your chest about having a loud exhaust find somewhere more suitable.

I think you're confusing something here - 92dB would be OUTSIDE the car, probably measured near the exhaust?

For a free-flowing exhaust thats still fairly quiet (sometimes inaudible when cruising at 50-60), make sure you get 2 mufflers, no resonators or anything. I've got a 3" oval magnaflow muffler at the rear and another 3" oval muffler in the middle. Being a wagon I need it quiet to reduce drone!

Its definitely quiet enough but not as quiet as stock.

To make it quieter and still get good flow, use twin pipes...although this will cost more.

It seems you either get good power, or a whisper quiet exhaust, but not both. Also I wouldn't bother doing other mods when you have the stock exhaust, except maybe just an SAFC or something - to maybe save a bit on fuel? Other than that, be aware that adding more boost pressure (ie. more psi) will likely just put more stress on your turbo without actually flowing more air through your engine (it could actually flow less!). psi is a measure of pressure, not necessarily airflow. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...