Jump to content
SAU Community

Recommended Posts

so for a while, ive had this wierd grinding that has come on and off here with a strong humming. lately it has got worse and worse, so eventually i popped the boot and listened to it on idle and as i thought it was coming from the pick up where the fuel pump is.

now i had just recently replaced a f**ked stock one with a bosch 040, even had it installed by boostworx whos a very reputable shop in SA, so its left me puzzled as i have bever heard of one of these failing before. now ive gotta go have a look for the warranty papers :)

Link to comment
https://www.sau.com.au/forums/topic/167602-a-bosch-040-failure/
Share on other sites

Hey Stew,

Are you able to describe your setup? Is the 040 where the stocky was? Same pick up height?, sock filter?

Mate of mine had a few let go in his 180 recently. He had heaps of crap in his tank tho lol, might be worth a look.

I'm thinking of late, this is how many die, and how they are getting such a bad rap :D

no. there just shit. lol ive turned blu in the face telling people they just dont work.....

cold ok. hot gay.

Im not sure what hot gays have to do with it, but as long as industry continues to use em, so well I :D

Hey Stew,

Are you able to describe your setup? Is the 040 where the stocky was? Same pick up height?, sock filter?

to be honest i do not know as boostworx put it in. i can pull it out and have a look if need be. boostworx are a reputable workshop, and it seems to pick up as much as the stock one, if not a bit more.

Im not sure what hot gays have to do with it, but as long as industry continues to use em, so well I :D

lol.

yeah i replace them for the fun of it do i???? ever put a fuel pressure guage on one from cold to hot and see the pressure drop down to 10 pound when the fuel heats up? if not your driving a time bomb.

but its ok. you simply turn it off and re-start. and wait for it to start cavitating again.

it was kind of a piss take after how many people always reccomended them saying theyd never had one fail etc.

the pumps themselves dont fail. the way they are mounted is important. if they recieve any sort of air bubble then they cavitate and loose pressure. they still work but they dont operate in fuel over about 30degrees

besides they only put out 10% more than a gtr pump.

To start with, if you didn't have the tank removed and cleaned...and can show proof, then no warranty will be had. Also...who said the pump has failed. Just because it makes a bit of a noise. I have used a fair few of these before without failure on a single one. Doesn't mean it can't happen but it's highly unlikely. The noises can quite possibly be coming from the standard mounting frame which the pump will vibrate against if it has no padding between itself and the pump. Also if they are mounted too low they can vibrate against the bottom of the tank.

Noise doesn't mean stuffed.

yeah. like they dont fail there output just drops off as the fuel heats up. happent to me and 3 of our customers. they pumps them selve ae fine. they just went operating properly.

kinda hard to explain with out a 10 min long video showing exacly what gos on.

th o44 is a gem. no dramas regardless of mounting style

(lol @ spelling,dialing wand needed)

to be honest i do not know as boostworx put it in. i can pull it out and have a look if need be. boostworx are a reputable workshop, and it seems to pick up as much as the stock one, if not a bit more.

Shaun measures the length and sets them up correctly. So yes.. Exactly the same height as stock.

Bosch pumps do get groany when the fuel heats up. When mine wasn't receiving full volts it was so bad the floor pan would vibrate and could be heard/felt over the radio.

To start with, if you didn't have the tank removed and cleaned...and can show proof, then no warranty will be had. Also...who said the pump has failed. Just because it makes a bit of a noise. I have used a fair few of these before without failure on a single one. Doesn't mean it can't happen but it's highly unlikely. The noises can quite possibly be coming from the standard mounting frame which the pump will vibrate against if it has no padding between itself and the pump. Also if they are mounted too low they can vibrate against the bottom of the tank.

Noise doesn't mean stuffed.

yeh, i read the warranty, bit annoying.

i used a question mark in the title because i was asking a question, i wasnt stating it had failed. it still seems to be working, although i have noticed some stuttering, but in saying that i have fitted an RB25 turbo recently.

its been a deteriorating issue, it has been getting worse over time, now considering i have driven in 43' heat and not had this problem, but now driving in 20' heat and having it worse than ever doesnt seem to make sense. the noise happens here and there, not every time i drive it. happens when its cold (just reached or a bit below operating temp), hot, doesnt matter.

the humming is one thing, but the loud scraping noise is a bit of a worry.

ill take it to shaun and see what he thinks, if its just the noise, im not fussed, but when i hear something like that, i want to make sure im not going to have to be picking up pieces of my engine any time soon.

went to turn on my car today, turned the ignition on, but didnt hear any fuel pump buzz like usual. so went to crank it over, started terrible like usual, did it again and gave it a bit of throttle and it made it. turned it off, tried it again, no fuel pump buzz, cranked it over again, started just as bad again (which is unusual), kept repeating this and never heard the fuel pump buzz, not sure whats happening. the noise wasnt very prominant, but like i said, it happens here and there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the re003s’ on my 06 XT Forester Turbo and I highly rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...