Jump to content
SAU Community

Knowledgeable Tuner Of New Emanage Ultimate?

2gceffy

By 2gceffy,
in Queensland

 Share

Recommended Posts

2gceffy Rising Star

2gceffy

Posted
Posted

hey guys

dont think iv posted in here before so a hello to everyone !!

at the moment im doin the usual searchin for parts and tryin to plan out everything, money, turbo, ecu and time..

ecu side of things iv decided to go with a emanage ultimate (if pfc doesnt pop up by then) just curious to know people's experiance with tuners in QLD..

i havnt had any tuning done before so new to this side of things (done most other things)

in a nut shell i just want to know where the best place is to get my tune? who has experiance with the new emange?

mercury comes straight to mind same with P.I.T.S down the coast but im more after the "best" tune

reason for this is im not sure who has played with the EMU before

im willing to travel not settle for whats closest !

any adivse or even anyone who is running one where did you get it tuned and were you happy

thanks for your time

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Never been asked this question before...

Maby ask the distributor of Greddy in Australia "Who is the best" and see what they have to say???

But im sure Matt Spry tunes them, so Id be talking to him as he is also know as "Tuning God" in some circles... :D

2gceffy Rising Star

2gceffy

Posted
  • Author
Posted (edited)

yeah thats what i thought everyone ranks he very highly

i figure fork out once on a tune that is worth more than another and be happy, no point spending all the money if nothing is doin its part, plus i wanna try get the plug n play harness to save any troubles, apparently only problems ever caused were by wiring fault

thanks

Edited by 2gceffy
Col-GTSX Grand Master

Col-GTSX

Posted
Posted
If your after the best tune and willing to travel have a small holiday and get your car tuned at CRD

Yeah they are actually sponcers of the forums also, you can contact them via pm CLICK HERE.

They may also have an idea of a place more local...?

  • 2 weeks later...
  • 6 months later...
pear Mentor

pear

Posted
Posted

Any updates on this subject?

I've just picked up a emanage ultimate for a good price.

Looking to get it installed and would like 2 tunes (one for the daily driving).

Matt Spry would be my first choice, but I haven't spoken to anyone yet.

Would he be the one to do the install as well? R34 GTT has to be wired, no PnP :)

R334door Experienced

R334door

Posted
Posted
Im going to be getting an emanage ultimate in the next month or so as well - also interested to know of people's experiences with local tuners.

I know a guy who had this system and found it not very flexible to tune, he didnt like it so pulled it out and got a power fc.

pear Mentor

pear

Posted
Posted
I know a guy who had this system and found it not very flexible to tune, he didnt like it so pulled it out and got a power fc.

a couple of things;

1) The PFC is everyone's 1st choice, but they don't make them anymore (for the 34 GTT) and if you can find one, the price is crazy.

2) emanage Blue vs emanage Ultimate. The earlier Blue seems to give a lot of people trouble! but after speaking to a few people at SEMA, I'm thinking the Ultimate will be ok for what I want.

There doesn't seem to be many 34 GTT in QLD with an EMU... I was hoping to get some more feedback from someone local.

R334door Experienced

R334door

Posted
Posted
I'm not 100% sure where he is, but his details will be on here somewhere!

i didnt think about the part with the Gtt not being able to use power fc, there are other alternatives like a haltec,Motec or EMS.

Yeah thats fair enough about the emu and the blue.I think the guy i kow had the blue emanage .

Matty is in Molendular near gold coast not far off broad beach, cant find his other details off the top of my head but im certain that more than one person will have them.

53XYN Veteran

53XYN

Posted
Posted

correct me if im wrong .. but the EMU and emange blue are all piggy back systems not a standalone computer most you can get out of these are fuel and air mixtures similar to SAFC NEO but a lil better ?? plus for Boost control options you'll need to use the E01 which plugs into both the EM ECU ..

pear Mentor

pear

Posted
Posted
correct me if im wrong .. but the EMU and emange blue are all piggy back systems not a standalone computer most you can get out of these are fuel and air mixtures similar to SAFC NEO but a lil better ?? plus for Boost control options you'll need to use the E01 which plugs into both the EM ECU ..

Hey Vish, yes both are piggyback systems, but the ultimate has a lot more options than just fuel & air. for the money I think it's a good option.

There's some good info here, but not much discussion on QLD installers/tuners

http://www.skylinesaustralia.com/forums/ma...56-t161460.html

FineLine Grand Master

FineLine

Posted
Posted

Ipswich is where its at. Signature performance is the joint, Mick is his name. 32815281 is his number.

Several members rides including my own have been tuned by Mick with very good results.

pear Mentor

pear

Posted
Posted
Ipswich is where its at. Signature performance is the joint, Mick is his name. 32815281 is his number.

Several members rides including my own have been tuned by Mick with very good results.

thanks Noel, I'll give him a call next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...