Jump to content
SAU Community

Recommended Posts

hey guys

dont think iv posted in here before so a hello to everyone !!

at the moment im doin the usual searchin for parts and tryin to plan out everything, money, turbo, ecu and time..

ecu side of things iv decided to go with a emanage ultimate (if pfc doesnt pop up by then) just curious to know people's experiance with tuners in QLD..

i havnt had any tuning done before so new to this side of things (done most other things)

in a nut shell i just want to know where the best place is to get my tune? who has experiance with the new emange?

mercury comes straight to mind same with P.I.T.S down the coast but im more after the "best" tune

reason for this is im not sure who has played with the EMU before

im willing to travel not settle for whats closest !

any adivse or even anyone who is running one where did you get it tuned and were you happy

thanks for your time

Never been asked this question before...

Maby ask the distributor of Greddy in Australia "Who is the best" and see what they have to say???

But im sure Matt Spry tunes them, so Id be talking to him as he is also know as "Tuning God" in some circles... :D

yeah thats what i thought everyone ranks he very highly

i figure fork out once on a tune that is worth more than another and be happy, no point spending all the money if nothing is doin its part, plus i wanna try get the plug n play harness to save any troubles, apparently only problems ever caused were by wiring fault

thanks

Edited by 2gceffy
If your after the best tune and willing to travel have a small holiday and get your car tuned at CRD

Yeah they are actually sponcers of the forums also, you can contact them via pm CLICK HERE.

They may also have an idea of a place more local...?

  • 2 weeks later...
  • 6 months later...

Any updates on this subject?

I've just picked up a emanage ultimate for a good price.

Looking to get it installed and would like 2 tunes (one for the daily driving).

Matt Spry would be my first choice, but I haven't spoken to anyone yet.

Would he be the one to do the install as well? R34 GTT has to be wired, no PnP :)

Im going to be getting an emanage ultimate in the next month or so as well - also interested to know of people's experiences with local tuners.

I know a guy who had this system and found it not very flexible to tune, he didnt like it so pulled it out and got a power fc.

I know a guy who had this system and found it not very flexible to tune, he didnt like it so pulled it out and got a power fc.

a couple of things;

1) The PFC is everyone's 1st choice, but they don't make them anymore (for the 34 GTT) and if you can find one, the price is crazy.

2) emanage Blue vs emanage Ultimate. The earlier Blue seems to give a lot of people trouble! but after speaking to a few people at SEMA, I'm thinking the Ultimate will be ok for what I want.

There doesn't seem to be many 34 GTT in QLD with an EMU... I was hoping to get some more feedback from someone local.

I'm not 100% sure where he is, but his details will be on here somewhere!

i didnt think about the part with the Gtt not being able to use power fc, there are other alternatives like a haltec,Motec or EMS.

Yeah thats fair enough about the emu and the blue.I think the guy i kow had the blue emanage .

Matty is in Molendular near gold coast not far off broad beach, cant find his other details off the top of my head but im certain that more than one person will have them.

correct me if im wrong .. but the EMU and emange blue are all piggy back systems not a standalone computer most you can get out of these are fuel and air mixtures similar to SAFC NEO but a lil better ?? plus for Boost control options you'll need to use the E01 which plugs into both the EM ECU ..

correct me if im wrong .. but the EMU and emange blue are all piggy back systems not a standalone computer most you can get out of these are fuel and air mixtures similar to SAFC NEO but a lil better ?? plus for Boost control options you'll need to use the E01 which plugs into both the EM ECU ..

Hey Vish, yes both are piggyback systems, but the ultimate has a lot more options than just fuel & air. for the money I think it's a good option.

There's some good info here, but not much discussion on QLD installers/tuners

http://www.skylinesaustralia.com/forums/ma...56-t161460.html

Ipswich is where its at. Signature performance is the joint, Mick is his name. 32815281 is his number.

Several members rides including my own have been tuned by Mick with very good results.

Ipswich is where its at. Signature performance is the joint, Mick is his name. 32815281 is his number.

Several members rides including my own have been tuned by Mick with very good results.

thanks Noel, I'll give him a call next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...