Jump to content
SAU Community

Recommended Posts

Last night it took me about an hour and a half to get home when it usually takes 20 mins, due to major traffic jams on great eastern and tonkin hwy. I just found out what happened.

A motorbike was travelling along tonkin hwy. a toyota was apparently doing stupid speeds and didnt see the bike and ran into the back of with the front corner of the vehicle. the toyota hit it so hard the bike became stuck onto the toyota.

the male on the bike was thrown of the bike with impact.

the female was dragged under the toyota for around 100 metres.

Trucks travelling along tonkin formed a blockade so cars wouldnt hit the bodys and wreckage.

When the ambos arrived then found the first body (the male) and put a sheet over him as he was long gone.

They got to the toyota and realised the female was still underneath it. So the ambos asked one of the truck drivers if they could use his hydraulic lift to get the car off the body to see if she was still alive.

The truck driver didnt seem to think it would be strong enough but he gave it ago.

They lifted it up and... the truck driver looks down. It was his mum under the car. His father and mother had been riding that bike.

Both killed.

That poor truck driver. What a horrible thing to see.

My condolences and sympathies go out to him and his family.

Link to comment
https://www.sau.com.au/forums/topic/168241-final-destination-on-tonkin-hwy/
Share on other sites

Two people have died in a horrendous afternoon accident in Redcliffe.

A man and a woman, believed to be aged in their 50s, were both killed when the Harley Davidson motorcycle they were travelling on was rammed from behind by a green Toyota Lexcen about 2.45pm today.

The accident happened at the start of the Redcliffe Bridge on Tonkin Highway, near the Great Eastern Highway intersection.

Police said it appeared the car had hit the motorcycle from behind then pushed it forward about 100m to the start of the bridge.

It is understood the woman died at the scene and the man was transported by St John Ambulance to Royal Perth Hospital, but passed away shortly afterward.

Police said neither were wearing motorcycle helmets at the time of the accident.

Major Crash officers are investigating whether speed may have played a part in the incident.

damn.......

thats a f**ked up story.. that truckie will be seeing that in hes dream for years to come.. feel sorry for the guy. hope the driver of the commodore/lexen goes away for it

btw same car different badges.. hard to tell the difference

aww that is terrible...i feel for the truckie...having to see that and having to live everyday replaying what happened is horrible....losing someone is never nice, but seeing it like that is horrific :D

it is never easy dealing with losing loved ones my wishes to him and his family :laugh:

no helmets?

surely that cant be f**king true !

yeah adoraa - sold my bike recently, Im thinking that perhaps, never know but just perhaps, my kneepain saved me from a bad "off", due to the stupid speeds I used to ride at thru the Hills. never had an accident, but as your skill level improves over time you dont slow down but infact speed up.

wildcat - yeah those sort of replay images in the truckies head will be with him forever. it'll ruin his life. :domokun:

  • 2 months later...

Holey shit i just got a huge shiver after reading that. I cant even imagine what the poor truckie is going through.

There is a way that allows you to not wear a helmet

http://www.slp.wa.gov.au/statutes/regs.nsf...hlight=2,helmet



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...