Jump to content
SAU Community

Greddy Profec B Spec Ii

monkeykplunk
 Share

Recommended Posts

monkeykplunk Mentor

monkeykplunk

Posted
Posted

For sale

Greddy profec B-spec II electronic boost controller.

Profec B-Spec II's basic function to increase boost is as easy as the original,

with an added built in boost pressure display and optional features like real-time,

peak or last boost display (in either kPa or PSI).

There are optional warning and boost limiter functions that can be programmed to offer much more control.

The two presets values can be stored and are executed by a larger capacity inline solenoid valve.

This unit does not require extensive programming and is ideal for low to high boost levels for single or twin turbos with actuator or external wastegates.

Unit is brand new, still in box.

I need money as I've run out because of no job for a few weeks.

I bought it off these forums for $400. And never got round to installing it.

Price: $350 delivered. Not Negotiable!

These still sell for $400 on here or around $500 elsewhere.

profec%20b-spec%20II.jpg

Link to comment
https://www.sau.com.au/forums/topic/168334-greddy-profec-b-spec-ii/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...