Jump to content
SAU Community

Recommended Posts

Well it was perfect weather for racing, dry and cold.

Lots of slower traffic today as expected.

I didn't get my '49 but found another half a second for a PB of 1.51.26. The next second and a bit is going to be hard I don't know where it's going to come from.

You all missed an awesome day! :)

Cheers

Andrew

As a matter of fact, you are absolutely right. I WAS!!

I don't care if there were cars there older than me, I'll take it!

LOL...thats why im thinking about doing more MSCA days, i want trophies and since im in the same class as Snowman, Scotsman, Jack and Ferni etc...im no chance of doing any good in the WRX points system. Budge wont put me up against the other rwd 2L cars like Silvias :)

LOL...thats why im thinking about doing more MSCA days, i want trophies and since im in the same class as Snowman, Scotsman, Jack and Ferni etc...im no chance of doing any good in the WRX points system. Budge wont put me up against the other rwd 2L cars like Silvias :P

Budge?

What are you talking about?

It's been well publicised about my crusade for a 2WD and a 4WD class as 2 parts of the WRX Club Associate Class.

Unfortunately I don't make those decisions.

Stupid people do.

MY new tyres are mauled on the right hand side, especially the front

Yeah. P.I. will do that ! ! My mate with a Ducatt's 999s EATS the LHS of His rear tyre there, He's gotta save ex-P.I. tyres for Broadford, where it's nearly all RH. Turns.

Congrats on the '51 Andrew, I'm SO coming gunning for that time once I've got a fit ride, and a BIG rear wing to stop the high-speed oversteer I got at P.I. ! ! That'll be deep into brave-territory tho, sounds like You'll be eeeking more out of the black beast once you've got some clear track and plenty of brave pills ! :(

High-Five for the Fastest time, btw. :P

Wowsers, definitely taking the scatter-gun approach to lapping there ! !

I'm amazed that the green lap on that pic drops 3 tenths in sector 2 (southern Loop) with just that tiny drop in speed onto the straight.. . . a lil' moment, perhaps? ? :P

Well it was perfect weather for racing, dry and cold.

Lots of slower traffic today as expected.

I didn't get my '49 but found another half a second for a PB of 1.51.26. The next second and a bit is going to be hard I don't know where it's going to come from.

You all missed an awesome day! :)

Cheers

Andrew

Well done Andrew, must feel good being the fastest car on the day!!!! :(

Alot of people (usually spectators) don't realise how hard it is to get that extra second at that level, your doing well, it will come...

Now for flat 20's at Sandown?!?! :P

Phillip Island seems to be a funny place for some people. I remember I did a 1.49.3 down there with stock turbo's and everything when I could only manage a best of 1.25's at Sandown. And it seemed I could get into the 49's lap after lap back then. Scotsman still hasn't managed a sub 1.50 either yet he's done a 1.21 at Sandown.

I don't know what it is that can make such a big difference at that place but something sure does.

Phillip Island seems to be a funny place for some people. I remember I did a 1.49.3 down there with stock turbo's and everything when I could only manage a best of 1.25's at Sandown. And it seemed I could get into the 49's lap after lap back then. Scotsman still hasn't managed a sub 1.50 either yet he's done a 1.21 at Sandown.

I don't know what it is that can make such a big difference at that place but something sure does.

big cahones and consistency :)

Wowsers, definitely taking the scatter-gun approach to lapping there ! !

I'm amazed that the green lap on that pic drops 3 tenths in sector 2 (southern Loop) with just that tiny drop in speed onto the straight.. . . a lil' moment, perhaps? ? :teehee:

Traffic. An old Schnitzer M3 was there and creating havoc. :D

I dont think there is any real secret to either place. You just have to be comfortable in the car and work up to a pace. I know if i just used 5th gear at turn 1 and at the Hayshed i would have got into the low 1:51s, possibly high 1:50s. I did the 1:52 flat and it was a long way from a smooth lap.

Sandown? Its all about getting on to the straights well and carrying what speed you can through turn 1 and up to Dandenong. I have done an about face about my car and think its better at PI then Sandown. My car is just too scary coming on to the straights and in the braking areas at Sandown...doesnt like the bumps at all. Phillip Island the suspension may give out before the tyres shoudl, but its predictable.

It still has 1-2 seconds in it at the Island as is. But i dont think the old 32 could do much better then a high 1:21. at Sandown. I will never know though as next time out i will have the new suspension in which will hopefully make it a little nicer to drive and allow me to use the correct gears without scaring myself.

I am committed to getting the RB20 GTSt into the 1:49s at PI and low 1:21s at Sandown. Past that im going to need more car. Which i cant see the sense in. It will just get too expensive and those times will be good enough for me to think im doing a good enough job behind the wheel of ol silver.

Either way, its all experience and good fun :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...