Jump to content
SAU Community

Recommended Posts

Picked up my self a 1990 r32 gtst a week ago and have been having a play.

Modified the dash a bit. Moved the aircon controls to the bottom. In the 2din space above plan to install either a new head unit and foldout vga touchscreen or flush mount a vga touchscreen in the space and a new head unit where the ash tray is.

dash.JPG

After that is done will be installing a simple PC and hooking it up to the ECU with some voltage sensors.

Will then be able to setup digital gauges and data logging.

Will be writing the software my self and will probably include a media playing in it.

Anyone wanting to do something similar?

Will have some software done soon if u wanna have a go aswell.

Will be great for road tuning due to the data logging

Link to comment
https://www.sau.com.au/forums/topic/169519-dash-modification/
Share on other sites

Nah no effort at all.

Dash modification will be easy have done a few before. Moving the aircon control was easy will look better with the LCD up higher.

Have decided to go the built in LCD panel as it looks alot classier than the pop out screen.

I have been programming since I was 8 so the engine monitoring software will be pritty simple.

Engine sensors are easy to read thanks to a simple USB device that reads voltage levels. Will need to connect a map sensor to read boost in.

Simple as. Hopefully be installing the monitor this weekend. And will put the carput together aswell.

Then will have to wait for my USB device to arrive then the fun starts :)

nice work dude, i did something similar with my ebc

dsc00057largefv1.jpg

going to chop out the ash-tray and lighter soon, and add 2 gauges there

^^Thats da bomb..... Anyone else got ideas how they hold the Power FC Commander unit? Im currently using a mobile phone holder, hooks onto the air cond vent on drivers right side but am not very happy with it. It doesn't hook onto the vent properly. Cars a 34 Gt-t btw.

^^Thats da bomb..... Anyone else got ideas how they hold the Power FC Commander unit? Im currently using a mobile phone holder, hooks onto the air cond vent on drivers right side but am not very happy with it. It doesn't hook onto the vent properly. Cars a 34 Gt-t btw.

Velcro dude

you can use a rsm/ safc stand... the legs that stick on the dash can bend so you can bend them into position with double sided tape... then use velcro to stick the power fc controller on the stand with velcro

but that lcd screen looks unreal! very very nice work!

also with this pc in the car, i know theres a thread in NS about it

I have been toying with the idea of a car pc for a while now, how were you planning on powering it?

The way I see it is I wanted to use pc parts I have at home, I could use a standard 240V PSU and install an inverter/transformer to go from 12V DC to 240V AC. I don't like the idea of having 240V AC anywhere in my car.. The other option is a 12V DC PSU can be bought for a much heftier price..

I would also like to know what sort of LCD screen you end up going with..

Cheers,

Bubbs :P

The screen to the part of the dash where the dials sit? or the screen to the clear plastic cover over the dials? For my application I was just going to mount a screen to the left of the centre console and a neat arm dohicky that will fold down and out of the way..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah. OK. I take it back. I hadn't looked closely at the R33/4 arms and presumed that GKTech did as GKTech do everywhere else, which is to use sphericals there. The poly bushings are made to be 100% interchangeable, should use the standard bolt just fine. Every other bush in every other place in pretty much every other car, does.
    • @silviaz Ok cool, so much easier with a video. I can see why this video would be confusing for new players.   It is obvious that this entire bonnet is going to be resprayed, have a look in the background around 2:05, you can see a bunch of bare metal on the left side of the bonnet.  It's not an issue for the primer being laid down on the non-prepped clear on the bonnet. It will be sanded off at a later stage.  This might not be obvious to new players, but working on bare metal and factory paint in this instance, the factory paint is like a mountain and the bare metal is a huge valley. The bonnet needs to be levelled flat before it receives it's final stage of colour and clear coat. During this levelling process, the primer that is landing on the clear that you are worried about will be removed.  Also, this guy is out of control. Zero PPE while spraying, maybe he is a good example overall about what not to do lol.
    • Ok I FINALLY found a video lol. This took way longer than it should have as I could have sworn I saw multiple videos like this. I kept finding the completely opposite (the correct way of doing this). I wouldn't be surprised if I f**ked this up somehow.  I just realised where I've been getting confused and even with other things I work on. I haven't been doing things the regular way instead I'm going a roundabout way of doing things, like putting epoxy primer first then filler for example instead of putting just filler then primer on top of that, then wondering what happens if I get that primer on the clear coat that I haven't sanded yet. This was a bit of an epiphany 馃槀  But anyways, here this video. Time stamp, 2:56, some of the primer lands on the paint unscuffed above. You can see from the reflection it looks shiny.  
    • It does, this part circled in red. I assume the OEM bolt might not work well with the poly bushing because the dimensions may be different?
    • The J arm doesn't have bushes either. Assuming that by "J arm" you mean the part of the upright that runs down from the upper arm's outer bushes to the top of the hub. That has a kingpin style bearing in it. If you meant the lower control arm, it has 1 bush, at its inner end. If you have PU in there, that is superior to Nismo rubber. If you meant the caster/tension rod - it has 1x bush at the front end, and again PU is superior to Nismo rubber. But as I said above, I would definitely get the GKTech arms for that, as sphericals slay all other options there.
  • Create New...