Jump to content
SAU Community

Apexi Fc Commander Pro Activation

h2k

By h2k,
in Engines & Forced Induction

 Share

Recommended Posts

h2k Enthusiast

h2k

Posted
Posted

I've recently bought a Apexi FC Commander Pro cable with software package, and I used the serials and download passwords to download the software but it won't let me activate the software. It only comes up with registration fails and "check your internet connection". I know I am on internet and I am not behind a firewill or have any port routing. Im suspecting that the Apexi activation server is down! Does anybody know how to contact Apexi via email? I can't get trough on telephone :rofl:

And does anybody know if you can use Datalogit with the apexi cable and box? or do I have to have the datalogit dongle?

Link to comment
https://www.sau.com.au/forums/topic/169693-apexi-fc-commander-pro-activation/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

datalogit i dont believe works with the apexi pro cable. i am pretty sure datalogit only works with their specific box.

fc tune should however. would be interested in letting me "borrow" the software so i can try and "make it work" >_<

SilverECR33 Veteran

SilverECR33

Posted
Posted

hey i Actually did this recently. No Data Logic is totally Diff, requires their Hardware with 'Their' Software.

We had some issues getting it activated also. Found the link we were provided didnt work after 5pm.. ??? worked fine the next morning at 8am. strange i thought.

h2k Enthusiast

h2k

Posted
  • Author
Posted

its the english software, i've tried to activate the software several times a day for a whole week now and still I cannot get trough and its annoying the shit out of me. I paid alot for the package and Im going to the dynos in a couple of days. It's a 12 hour drive to the nearest dyno shop so its important I have everything in order before I go =)

I'll try FC Tune beta from the rx7 forum today and see if I get contact with my pfc.

h2k Enthusiast

h2k

Posted
  • Author
Posted

I finaly got a hold on Apexi USA via telefone, and they reset my serial number. They said it was a common bug but after a reset my activation worked after 15 minutes! So now I am a happy puppy :) FC Pro had a very extensive help file, I hope Paul makes good use on it on his excellent powerfc faq homepage :banana: thanks alot Paul33! :)

paulr33 Grand Master

paulr33

Posted
Posted

yeah the fc pro you brought is the same as the power excel fc pro, but the one you have is in english

the fc pro that got leaked is in japaense, but they both do the same thing. same as datalogit really

  • 2 years later...
jan25 Contributor

jan25

Posted
Posted
its the english software, i've tried to activate the software several times a day for a whole week now and still I cannot get trough and its annoying the shit out of me. I paid alot for the package and Im going to the dynos in a couple of days. It's a 12 hour drive to the nearest dyno shop so its important I have everything in order before I go =)

I'll try FC Tune beta from the rx7 forum today and see if I get contact with my pfc.

Finally did you succeed in the registration?

If not I can help you.

jan25 Contributor

jan25

Posted
Posted
hey i Actually did this recently. No Data Logic is totally Diff, requires their Hardware with 'Their' Software.

We had some issues getting it activated also. Found the link we were provided didnt work after 5pm.. ??? worked fine the next morning at 8am. strange i thought.

Have you done uninstall and installation again on different computer?

jan25 Contributor

jan25

Posted
Posted
datalogit i dont believe works with the apexi pro cable. i am pretty sure datalogit only works with their specific box.

fc tune should however. would be interested in letting me "borrow" the software so i can try and "make it work" :D

I can lend you the software. Which one you want? English or Japanese version.

Can you really make it work?

Can you do installation without registration?

jan25 Contributor

jan25

Posted
Posted
also noticed the help for fc pro is in english

just unlocked some good info and some english translationn on some of the features

swoittttttttttttttttttt

To read the help is not enough. Can you run the program and read the help from inside?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...