Jump to content
SAU Community

Recommended Posts

when I had my 32gts4 I dynoed it at 110kw atw (basically stock), but fast enough for me over a twisty mountan pass (and quick enough to keep up with a friend in a gtr - ok mabey he was holding back a bit because he had my girlfriend in the car, but she was still sh!tscared)

well im just really asking if its even possible to have 180kw with low boost using the right equipment?? Just curious. I was reading one the import magazines and it was going on about a consevative way of modding and it said that the point on modifying a turbo would be be trying to the most power out of it using the least amount of boost increase. So hence why I was asking if its even possible to have good numbers with low boost.

dont know why you would want to buy a new turbo to run 7-8psi.....run the stock turbo with stock boost controller with a decent exhaust, split dump pip,hiflow cat, 3" system, pod should get you to around 170kw.....raise boost to say 10psi which is still safe and you will have what u are looking for......this is alot cheaper then upgrading ur turbo, cause u would have to get an exhaust anyway....my 2 cents....

i got 188rwkw with hybrid FMIC, HKS pod, turbo back exhaust w/dump pipe on stock boost @ uas dyno day last weekend. apparently i have a 'freak car' :sorcerer:

when i had the boost controller on previously, it ran 202rwkw at 11psi

damn you.....there are others with good figures from light mods

only changes i have made are

turbo back exhaust

just jap fmic

boost controller

202.6rwkw. Hit 11psi 2300rpm, got to 12psi by 4500rpm for a bit and dropped to 10psi by redline....

damn you.....there are others with good figures from light mods

only changes i have made are

turbo back exhaust

just jap fmic

boost controller

202.6rwkw. Hit 11psi 2300rpm, got to 12psi by 4500rpm for a bit and dropped to 10psi by redline....

WTF????? is that all you got?? No aftermarket ECU?? That car must be running rich as hell.

your kidding thats awesome man!!!! Is that your R33 in the pic doing the monster burn out?? I was under the impression R33 ECU's were the cars weakest link and the first think that needed to go. keeping the stock ecu in your case is mad cause its protected well due to ecu's protection in regards to running rich. Is this common for a boosted R33 running 180-200rwkw to run on a stock ecu well like yours. Or is your R33 some kind of freak of nature!!!

Edited by LatinR33

yeah it was at the drags....put on some old stockies and sat there for a bit...

i dont know too much about whats normal, or much about r33 ecu's being new to the scene but it seems to be going good. again not sure what others are running with stock ecu...some guys said i should check if it has been modified or chipped....but i really dont know too much about it....just fiddled with boost controller to set it up and chuckedf it on....

Sounds to me your cars just a freak of nature cause I dont think the R33 ecu can be chipped or modded. Thats mad!! Some other guy here I just read got 188kw's on just an exhaust,fuel pump and power fc!!! thats nuts I know Dyno's figures arent exactly accurate but thats still alright :P Must go good regardless.

i had 195 with exhaust and intercooler on 10psi stock turbo. even have the airbox in there. it just happens. maybe its just cars from the south west lol. it was running very rich, but still made a reasonable power curve, with the exception of a massive hole at 6-7krpm. but still 195 lol.

since fitted exhaust cam gear, power fc and a few other jazz and with 12psi got 188 at the uas dyno day lol. put bosch 040 in the other day and will tune it again tomorow and see what i get, before fanging it on the skidpan on saturday :unsure:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...