Jump to content
SAU Community

Recommended Posts

Hi guys, ive been looking at getting a r32 gtst. I was looking at spending no more than $10K. Will i be able to get a good, clean car for this price? I live in SA btw.

Also, many of my friends are vs commodore drivers and they keep telling me that an r32 gtst is much slower than a 6 cylinder commodore because the r32 has such a heavy body. Is this true? Are r32 turbos really that slow?

Finally, if i spent about $1000 on basic performance upgrades, what should i buy and what kind of performance gain would i see?

Thanks a lot. =)

Link to comment
https://www.sau.com.au/forums/topic/170114-buying-a-new-skyine/
Share on other sites

well to start off with...r32 gtst's are not slow at all if anything a stock one with minor mods will prob be able to take on a 5ltr v8....being in SA and $10K for a r32 prob not at that price....if you want a nice and clean one you are most likely looking at $12-15K mark....and out of all skylines (r32, 33, 34) the r32 is the lightest....and if you can find a completely stock one...get a exhaust and front mount that way you can boost it up a bit...well good luck mate

Edited by Krishy

do you think a turbo back exhaust would give noticeable performance? do intercoolers give any extra performance or do they just allow for higher boost. cause i dont really wanna boost the turbo above stock. how about aftermarket bov's?

do you think a turbo back exhaust would give noticeable performance? do intercoolers give any extra performance or do they just allow for higher boost. cause i dont really wanna boost the turbo above stock. how about aftermarket bov's?

Turbo back will get you 15 - 20 rwkw. Intercoolers dont actually give etra performance, but do come in handy for more boost. I think the stock bov is good as it is....though one of the other guys was saying he wants to change his to an r33 bov.

you definately CAN get a decent r32 gtst for that much. specially when you're in SA...

probably can, but the main reason it will be forsale for that low, is because:

1) the buyer is too poor to keep it, or desperate to get the money for it - therefore probably didn't maintain it either, which may lead to potential headaches further on

2) it's already half stuffed, so by the time you put in a new motor it's not so cheap anymore.

Also when you factor in the insurance cost of around $1000 a year, petrol of about $50 a week, and everything else $8-9k is only the start. Anyhow, there are bargains out there, but there are also a lot of ongoing costs.

15-20rwkw seems like an awful lot. thats approx 15-20% of stock performance. do skylines have really restrictive exhausts or something?

15-20 extra kw would be more than noticeable when driving wouldnt it?

im going by my r33 figures here - stock for r33 is around 137rwkw - and now its at 164rwkw - thats with a turbo back exhaust and pod filter.

i do find that the exhaust made the car more responsive too....

wow, and they're less than $1000. I got a cat back for my dads 86 NA supra (i drive it), and that didnt give much of a performance boost at all. whats the difference between cat back and turbo back?

turbo back - is all the way from the turbo - the xforce system is only 900 or so from just jap....

I just bought a R32 gts-t for $8500, basically all it needs is a new diff coz one of the bearings is extremely loud, interior is perfect(apparently done 140,000kms) except one cut in passenger door, only a few minor dents in paint. The guys supplied me with RWC and a compression test, the compression was fairly low but I was expecting to spend $12500 for something like this so I have plenty for a new engine, also when on boost its starting to smell oily so I think I may need a new turbo(only $150). It even came with whiteline strut braces front and rear, 3" turbo back exhaust, and boost controller.

I was looking for a car for months though so don't except one to be available straight away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...